[ CourseLala.com ] Udemy - Build a Lego Helicopter in SolidWorks 3D CAD

Creation Time	Nov. 16, 2023, 3:53 p.m.
Last Access Time	April 21, 2025, 11:48 p.m.
File Size	2.9 GB
Keywords	a Lego SolidWorks - CourseLala Udemy Build in Helicopter CAD com 3D
Total Requests	231
Total Files	148
Magnet Link	Please wait ...
	Download (Magnet Link) Play (Watch Online)

~Get Your Files Here !/19. Stage 22 Finishing the Helicopter and Adding Mechanical Mates/2. Stage 22 Finishing the Helicopter and Adding Mechanical Mates.mp4 146.3 MB
~Get Your Files Here !/10. Stage 9 Making the Cockpit Area/1. Create the Right Angle with Curve Part.mp4 136.5 MB
~Get Your Files Here !/15. Stages 16 and 17 Making the Tail Rotor Section/2. Creating the Tail Fairing Part.mp4 132.7 MB
~Get Your Files Here !/2. Stage 1 Building the Fuselage Base/2. Making the Right Angle Beam - Part 1.mp4 123.2 MB
~Get Your Files Here !/16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/2. Creating the Tail Rotor Part.mp4 94.2 MB
~Get Your Files Here !/12. Stage 11 Make the Upper Fuselage/2. Stage 11 Make the Upper Fuselage Section, and Troubleshooting.mp4 92.9 MB
~Get Your Files Here !/2. Stage 1 Building the Fuselage Base/3. Making the Right Angle Beam - Part 2.mp4 91.4 MB
~Get Your Files Here !/2. Stage 1 Building the Fuselage Base/6. Creating the first Subassembly.mp4 90.5 MB
~Get Your Files Here !/14. Stages 13, 14 and 15 Building Up the Other Side of the Helicopter/1. Stages 13, 14 and 15 Building Up the Other Side of the Helicopter.mp4 89.5 MB
~Get Your Files Here !/12. Stage 11 Make the Upper Fuselage/1. Create the Four Beam with Extension Part.mp4 84.9 MB
~Get Your Files Here !/3. Stage 2 Expanding the Fuselage/2. Making the Right Angle Beam.mp4 84.6 MB
~Get Your Files Here !/2. Stage 1 Building the Fuselage Base/1. Creating the Axle.mp4 82.5 MB
~Get Your Files Here !/19. Stage 22 Finishing the Helicopter and Adding Mechanical Mates/1. Making the Main Rotor Blades.mp4 74.0 MB
~Get Your Files Here !/13. Stage 12 Create the Main Rotor/2. Making the Axle Joint Part.mp4 70.1 MB
~Get Your Files Here !/16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/3. Making the Half Bevel Gear Part.mp4 69.1 MB
~Get Your Files Here !/1. Introduction/Instructions - Lego Helicopter 30465.pdf 67.1 MB
~Get Your Files Here !/3. Stage 2 Expanding the Fuselage/4. Making Stage 2 - The Fuselage.mp4 66.8 MB
~Get Your Files Here !/7. Stage 6 Adding the Tail Rotor Transmission/2. Making the Large Bush Part.mp4 65.5 MB
~Get Your Files Here !/4. Stage 3 Adding to the Fuselage/2. Making the Cross Block Connector.mp4 65.4 MB
~Get Your Files Here !/2. Stage 1 Building the Fuselage Base/4. Building the Friction Pin.mp4 62.5 MB
~Get Your Files Here !/2. Stage 1 Building the Fuselage Base/5. Making the Pin with Bore.mp4 62.5 MB
~Get Your Files Here !/17. Stage 20 Starting the Skids/1. Creating the Pin with Large Bush Part.mp4 62.2 MB
~Get Your Files Here !/4. Stage 3 Adding to the Fuselage/3. Building Stage 3 - the Upper Fuselage.mp4 58.1 MB
~Get Your Files Here !/11. Stage 10 Building Up the Cockpit Rear Section/3. Stage 10 Make the Main Rotor Hub Section.mp4 57.3 MB
~Get Your Files Here !/13. Stage 12 Create the Main Rotor/3. Stage 12 Adding the Main Rotor Shaft.mp4 56.5 MB
~Get Your Files Here !/4. Stage 3 Adding to the Fuselage/1. Creating the Long Pin Part.mp4 49.0 MB
~Get Your Files Here !/5. Stage 4 Building the Tail Section/1. Building the 7-Long Beam.mp4 48.5 MB
~Get Your Files Here !/7. Stage 6 Adding the Tail Rotor Transmission/4. Stage 6 Adding the Tail Rotor Transmission.mp4 47.2 MB
~Get Your Files Here !/18. Stage 21 Finishing the Skids and Tail/2. Stage 21 Finishing the Skids and Tail.mp4 46.7 MB
~Get Your Files Here !/7. Stage 6 Adding the Tail Rotor Transmission/3. Making the Bevel Gear.mp4 46.3 MB
~Get Your Files Here !/16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/4. Stages 18 and 19 Adding the Tail Section.mp4 46.2 MB
~Get Your Files Here !/18. Stage 21 Finishing the Skids and Tail/1. Making the Light Stud and Pin with Stud Parts.mp4 45.4 MB
~Get Your Files Here !/11. Stage 10 Building Up the Cockpit Rear Section/1. Make the Three-Long Cross Block Part.mp4 42.9 MB
~Get Your Files Here !/16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/1. Making the Pin with Axle Part.mp4 41.5 MB
~Get Your Files Here !/8. Stage 7 Building Up the Helicopter Body/2. Stage 7 Building Up the Main Rotor Hub.mp4 39.5 MB
~Get Your Files Here !/9. Stage 8 Adding the Helicopter's Nose Section/1. Stage 8 Adding the Helicopter's Nose Section.mp4 39.4 MB
~Get Your Files Here !/17. Stage 20 Starting the Skids/2. Stage 20 Starting the Skids.mp4 35.9 MB
~Get Your Files Here !/5. Stage 4 Building the Tail Section/3. Stage 4 Creating the Tail Boom.mp4 33.3 MB
~Get Your Files Here !/15. Stages 16 and 17 Making the Tail Rotor Section/3. Stages 16 and 17 Making the Tail Section.mp4 31.9 MB
~Get Your Files Here !/8. Stage 7 Building Up the Helicopter Body/1. Creating the Two Block with Axle Holes.mp4 30.1 MB
~Get Your Files Here !/11. Stage 10 Building Up the Cockpit Rear Section/2. Create the Axle with Bore Part.mp4 29.5 MB
~Get Your Files Here !/6. Stage 5 Adding the Tail Rotor Transmission Housing/1. Making the One-Sided Pin with Bore.mp4 28.9 MB
~Get Your Files Here !/3. Stage 2 Expanding the Fuselage/3. Creating the Small Bush Part.mp4 28.0 MB
~Get Your Files Here !/3. Stage 2 Expanding the Fuselage/1. Creating a Longer Axle Using Configurations.mp4 27.8 MB
~Get Your Files Here !/15. Stages 16 and 17 Making the Tail Rotor Section/1. Making the 2-Long Axle Part.mp4 27.6 MB
~Get Your Files Here !/6. Stage 5 Adding the Tail Rotor Transmission Housing/2. Stage 5 Adding the Tail Rotor Transmission Housing.mp4 25.1 MB
~Get Your Files Here !/1. Introduction/1. Welcome to the Course.mp4 25.1 MB
~Get Your Files Here !/5. Stage 4 Building the Tail Section/2. Making the 5-Long Beam.mp4 21.7 MB
~Get Your Files Here !/10. Stage 9 Making the Cockpit Area/2. Stage 9 Create the Cockpit Side.mp4 13.7 MB
~Get Your Files Here !/7. Stage 6 Adding the Tail Rotor Transmission/1. Creating the 9-Long Axle Part.mp4 13.0 MB
~Get Your Files Here !/1. Introduction/2. How to Use This Course.mp4 12.1 MB
~Get Your Files Here !/13. Stage 12 Create the Main Rotor/1. Creating the 7-Long Axle Part.mp4 10.2 MB
~Get Your Files Here !/1. Introduction/Instructions - Lego Helicopter 30465.png 7.7 MB
~Get Your Files Here !/1. Introduction/STEP File Assembly - Lego Helicopter - 30465.STEP 6.6 MB
~Get Your Files Here !/1. Introduction/Main Assembly - Lego Helicopter - 30465.SLDASM 1.2 MB
~Get Your Files Here !/1. Introduction/Corner Beam - 7x4x3 - 30465.SLDPRT 332.5 KB
~Get Your Files Here !/1. Introduction/Stage 17 - Lego Helicopter - 30465.SLDASM 311.5 KB
~Get Your Files Here !/1. Introduction/Axle - 30465.SLDPRT 294.4 KB
~Get Your Files Here !/1. Introduction/Right Angle Beam with Curve - 5x3 - 30465.SLDPRT 291.5 KB
~Get Your Files Here !/1. Introduction/Half Bevel Gear - 12 Tooth - 30465.SLDPRT 276.6 KB
~Get Your Files Here !/1. Introduction/Stage 1 - Lego Helicopter - 30465.SLDASM 269.3 KB
~Get Your Files Here !/1. Introduction/Stage 10 - Lego Helicopter - 30465.SLDASM 247.8 KB
~Get Your Files Here !/1. Introduction/Beam - 7 Long - 30465.SLDPRT 247.4 KB
~Get Your Files Here !/1. Introduction/Large Rotor Blade - 30465.SLDPRT 225.0 KB
~Get Your Files Here !/1. Introduction/Bevel Gear - 12 Tooth - 30465.SLDPRT 219.9 KB
~Get Your Files Here !/1. Introduction/Right Angle Beam - 4x2 - 30465.SLDPRT 210.0 KB
~Get Your Files Here !/1. Introduction/4 Beam with Extension - 30465.SLDPRT 207.7 KB
~Get Your Files Here !/1. Introduction/Tail Fairing - 30465.SLDPRT 201.5 KB
~Get Your Files Here !/1. Introduction/Beam - 5 Long - 30465.SLDPRT 201.1 KB
~Get Your Files Here !/1. Introduction/Axle Joint - 30465.SLDPRT 200.8 KB
~Get Your Files Here !/1. Introduction/Pin with Large Bush- 30465.SLDPRT 191.3 KB
~Get Your Files Here !/1. Introduction/Cross Block - 3 Long - 30465.SLDPRT 182.8 KB
~Get Your Files Here !/1. Introduction/Friction Pin with Bore - 30465.SLDPRT 166.9 KB
~Get Your Files Here !/1. Introduction/Stage 12- Lego Helicopter - 30465.SLDASM 165.3 KB
~Get Your Files Here !/1. Introduction/Axle with Bore - 30465.SLDPRT 155.9 KB
~Get Your Files Here !/1. Introduction/Stage 18 - Lego Helicopter - 30465.SLDASM 149.9 KB
~Get Your Files Here !/1. Introduction/Stage 6 - Lego Helicopter - 30465.SLDASM 149.3 KB
~Get Your Files Here !/1. Introduction/One Sided Friction Pin with Bore - 30465.SLDPRT 142.8 KB
~Get Your Files Here !/1. Introduction/Friction Pin - 30465.SLDPRT 140.7 KB
~Get Your Files Here !/1. Introduction/Long Friction Pin - 30465.SLDPRT 138.9 KB
~Get Your Files Here !/1. Introduction/Cross Block - 30465.SLDPRT 134.4 KB
~Get Your Files Here !/1. Introduction/Friction Pin with Long Axle - 30465.SLDPRT 133.2 KB
~Get Your Files Here !/1. Introduction/Stage 20 - Lego Helicopter - 30465.SLDASM 133.1 KB
~Get Your Files Here !/1. Introduction/Tail Rotor - 30465.SLDPRT 126.5 KB
~Get Your Files Here !/1. Introduction/Stage 2 - Lego Helicopter - 30465.SLDASM 125.2 KB
~Get Your Files Here !/1. Introduction/Stage 3 - Lego Helicopter - 30465.SLDASM 121.3 KB
~Get Your Files Here !/1. Introduction/Large Bush - 30465.SLDPRT 116.8 KB
~Get Your Files Here !/1. Introduction/Stage 7 - Lego Helicopter - 30465.SLDASM 113.2 KB
~Get Your Files Here !/1. Introduction/Friction Pin with Stud - 30465.SLDPRT 107.8 KB
~Get Your Files Here !/1. Introduction/Stage 8 - Lego Helicopter - 30465.SLDASM 104.9 KB
~Get Your Files Here !/1. Introduction/Small Bush - 30565.SLDPRT 95.5 KB
~Get Your Files Here !/1. Introduction/Stage 21 - Lego Helicopter - 30465.SLDASM 93.1 KB
~Get Your Files Here !/1. Introduction/2 Beam with Axle Holes - 30465.SLDPRT 87.0 KB
~Get Your Files Here !/1. Introduction/Light Stud - 30465.SLDPRT 65.2 KB
~Get Your Files Here !/2. Stage 1 Building the Fuselage Base/2. Making the Right Angle Beam - Part 1.srt 24.4 KB
~Get Your Files Here !/10. Stage 9 Making the Cockpit Area/1. Create the Right Angle with Curve Part.srt 23.8 KB
~Get Your Files Here !/15. Stages 16 and 17 Making the Tail Rotor Section/2. Creating the Tail Fairing Part.srt 23.3 KB
~Get Your Files Here !/16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/2. Creating the Tail Rotor Part.srt 20.1 KB
~Get Your Files Here !/19. Stage 22 Finishing the Helicopter and Adding Mechanical Mates/2. Stage 22 Finishing the Helicopter and Adding Mechanical Mates.srt 18.6 KB
~Get Your Files Here !/2. Stage 1 Building the Fuselage Base/1. Creating the Axle.srt 18.1 KB
~Get Your Files Here !/2. Stage 1 Building the Fuselage Base/6. Creating the first Subassembly.srt 17.1 KB
~Get Your Files Here !/3. Stage 2 Expanding the Fuselage/2. Making the Right Angle Beam.srt 15.7 KB
~Get Your Files Here !/12. Stage 11 Make the Upper Fuselage/1. Create the Four Beam with Extension Part.srt 14.6 KB
~Get Your Files Here !/2. Stage 1 Building the Fuselage Base/3. Making the Right Angle Beam - Part 2.srt 14.3 KB
~Get Your Files Here !/12. Stage 11 Make the Upper Fuselage/2. Stage 11 Make the Upper Fuselage Section, and Troubleshooting.srt 13.3 KB
~Get Your Files Here !/19. Stage 22 Finishing the Helicopter and Adding Mechanical Mates/1. Making the Main Rotor Blades.srt 12.8 KB
~Get Your Files Here !/2. Stage 1 Building the Fuselage Base/4. Building the Friction Pin.srt 12.6 KB
~Get Your Files Here !/2. Stage 1 Building the Fuselage Base/5. Making the Pin with Bore.srt 12.3 KB
~Get Your Files Here !/17. Stage 20 Starting the Skids/1. Creating the Pin with Large Bush Part.srt 12.1 KB
~Get Your Files Here !/3. Stage 2 Expanding the Fuselage/4. Making Stage 2 - The Fuselage.srt 11.9 KB
~Get Your Files Here !/4. Stage 3 Adding to the Fuselage/2. Making the Cross Block Connector.srt 11.7 KB
~Get Your Files Here !/7. Stage 6 Adding the Tail Rotor Transmission/2. Making the Large Bush Part.srt 11.7 KB
~Get Your Files Here !/4. Stage 3 Adding to the Fuselage/1. Creating the Long Pin Part.srt 11.3 KB
~Get Your Files Here !/13. Stage 12 Create the Main Rotor/2. Making the Axle Joint Part.srt 10.9 KB
~Get Your Files Here !/14. Stages 13, 14 and 15 Building Up the Other Side of the Helicopter/1. Stages 13, 14 and 15 Building Up the Other Side of the Helicopter.srt 10.4 KB
~Get Your Files Here !/16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/3. Making the Half Bevel Gear Part.srt 10.0 KB
~Get Your Files Here !/4. Stage 3 Adding to the Fuselage/3. Building Stage 3 - the Upper Fuselage.srt 9.4 KB
~Get Your Files Here !/11. Stage 10 Building Up the Cockpit Rear Section/3. Stage 10 Make the Main Rotor Hub Section.srt 8.6 KB
~Get Your Files Here !/5. Stage 4 Building the Tail Section/1. Building the 7-Long Beam.srt 8.4 KB
~Get Your Files Here !/18. Stage 21 Finishing the Skids and Tail/1. Making the Light Stud and Pin with Stud Parts.srt 8.3 KB
~Get Your Files Here !/7. Stage 6 Adding the Tail Rotor Transmission/3. Making the Bevel Gear.srt 8.2 KB
~Get Your Files Here !/3. Stage 2 Expanding the Fuselage/1. Creating a Longer Axle Using Configurations.srt 8.1 KB
~Get Your Files Here !/13. Stage 12 Create the Main Rotor/3. Stage 12 Adding the Main Rotor Shaft.srt 8.1 KB
~Get Your Files Here !/11. Stage 10 Building Up the Cockpit Rear Section/1. Make the Three-Long Cross Block Part.srt 7.6 KB
~Get Your Files Here !/16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/4. Stages 18 and 19 Adding the Tail Section.srt 6.9 KB
~Get Your Files Here !/16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/1. Making the Pin with Axle Part.srt 6.8 KB
~Get Your Files Here !/6. Stage 5 Adding the Tail Rotor Transmission Housing/1. Making the One-Sided Pin with Bore.srt 6.6 KB
~Get Your Files Here !/8. Stage 7 Building Up the Helicopter Body/2. Stage 7 Building Up the Main Rotor Hub.srt 6.5 KB
~Get Your Files Here !/9. Stage 8 Adding the Helicopter's Nose Section/1. Stage 8 Adding the Helicopter's Nose Section.srt 6.2 KB
~Get Your Files Here !/7. Stage 6 Adding the Tail Rotor Transmission/4. Stage 6 Adding the Tail Rotor Transmission.srt 6.2 KB
~Get Your Files Here !/18. Stage 21 Finishing the Skids and Tail/2. Stage 21 Finishing the Skids and Tail.srt 6.0 KB
~Get Your Files Here !/15. Stages 16 and 17 Making the Tail Rotor Section/1. Making the 2-Long Axle Part.srt 5.4 KB
~Get Your Files Here !/8. Stage 7 Building Up the Helicopter Body/1. Creating the Two Block with Axle Holes.srt 4.9 KB
~Get Your Files Here !/11. Stage 10 Building Up the Cockpit Rear Section/2. Create the Axle with Bore Part.srt 4.9 KB
~Get Your Files Here !/17. Stage 20 Starting the Skids/2. Stage 20 Starting the Skids.srt 4.9 KB
~Get Your Files Here !/1. Introduction/2. How to Use This Course.srt 4.8 KB
~Get Your Files Here !/5. Stage 4 Building the Tail Section/3. Stage 4 Creating the Tail Boom.srt 4.8 KB
~Get Your Files Here !/15. Stages 16 and 17 Making the Tail Rotor Section/3. Stages 16 and 17 Making the Tail Section.srt 4.6 KB
~Get Your Files Here !/3. Stage 2 Expanding the Fuselage/3. Creating the Small Bush Part.srt 4.1 KB
~Get Your Files Here !/6. Stage 5 Adding the Tail Rotor Transmission Housing/2. Stage 5 Adding the Tail Rotor Transmission Housing.srt 4.1 KB
~Get Your Files Here !/5. Stage 4 Building the Tail Section/2. Making the 5-Long Beam.srt 4.0 KB
~Get Your Files Here !/7. Stage 6 Adding the Tail Rotor Transmission/1. Creating the 9-Long Axle Part.srt 3.5 KB
~Get Your Files Here !/13. Stage 12 Create the Main Rotor/1. Creating the 7-Long Axle Part.srt 2.1 KB
~Get Your Files Here !/1. Introduction/1. Welcome to the Course.srt 2.0 KB
~Get Your Files Here !/10. Stage 9 Making the Cockpit Area/2. Stage 9 Create the Cockpit Side.srt 1.8 KB
~Get Your Files Here !/Bonus Resources.txt 386 bytes
Get Bonus Downloads Here.url 180 bytes
~Get Your Files Here !/19. Stage 22 Finishing the Helicopter and Adding Mechanical Mates/3. Optional Assignment - Use Your New Lego Parts to Create a New Assembly.html 176 bytes

[ CourseLala.com ] Udemy - Build a Lego Helicopter in SolidWorks 3D CAD

File List

Download Torrent

Related Resources

Copyright Infringement