Udemy - SOLIDWORKS Academy A Comprehensive Course on SolidWorks. 2022
File List
- 06 - Let's Create Patterns/006 EXERCISE TIME_ Creating Burj Khalifa in Solidworks.mp4 224.0 MB
- 07 - Let's Learn Some Complex Features/001 Creating References Part 1_ Reference Planes.mp4 157.2 MB
- 07 - Let's Learn Some Complex Features/006 EXERCISE TIME_ Use of Swept Feature.mp4 147.9 MB
- 07 - Let's Learn Some Complex Features/009 Properties of Loft Feature.mp4 143.4 MB
- 13 - Let's Create Drafting Sheets/008 Know about Annotations & Symbols.mp4 142.7 MB
- 13 - Let's Create Drafting Sheets/004 Views Part 2_ Section Views & Detailed Views.mp4 137.9 MB
- 07 - Let's Learn Some Complex Features/015 Creating Threads using Thread Tool.mp4 137.7 MB
- 02 - Let's Get to Know about Editing Tools/008 EXERCISE TIME_ Use of Circular Pattern.mp4 135.9 MB
- 07 - Let's Learn Some Complex Features/010 Learn to Create Advance Curves.mp4 135.4 MB
- 04 - Let's Start Part Modeling/015 EXERCISE TIME_ Use of Fillets & Chamfer.mp4 134.0 MB
- 06 - Let's Create Patterns/003 EXERCISE TIME_ Learn to use Pattern.mp4 132.8 MB
- 13 - Let's Create Drafting Sheets/010 Finally_ Creating Bill of Materials.mp4 127.4 MB
- 04 - Let's Start Part Modeling/017 Creating Ribs_ The Support Feature.mp4 124.5 MB
- 04 - Let's Start Part Modeling/010 EXERCISE TIME_ Use of Revolve Feature.mp4 123.5 MB
- 02 - Let's Get to Know about Editing Tools/005 EXERCISE TIME_ Use of Trim.mp4 122.7 MB
- 10 - Let's Learn Some Advance Assembly Tools/008 Mechanical Mates Part 5_ Gear Mate.mp4 119.8 MB
- 13 - Let's Create Drafting Sheets/001 Introduction to Drafting.mp4 118.0 MB
- 07 - Let's Learn Some Complex Features/005 Some More Properties of Swept Feature.mp4 116.3 MB
- 13 - Let's Create Drafting Sheets/005 Views Part 3_ Broken Out Views & Crop Views.mp4 116.1 MB
- 10 - Let's Learn Some Advance Assembly Tools/003 Assembly Feature_ Belt_Chain Drive.mp4 114.5 MB
- 10 - Let's Learn Some Advance Assembly Tools/011 Mechanical Mates Part 6_ Rack & Pinion Mate.mp4 113.1 MB
- 06 - Let's Create Patterns/001 3D Patterns_ Linear Pattern & Pattern Properties.mp4 111.5 MB
- 13 - Let's Create Drafting Sheets/006 Editing Default Sheet Format.mp4 110.7 MB
- 10 - Let's Learn Some Advance Assembly Tools/004 Mechanical Mates Part 1_ Cam Follower Mate.mp4 108.8 MB
- 13 - Let's Create Drafting Sheets/009 Introduction To Assembly Drafting.mp4 108.6 MB
- 07 - Let's Learn Some Complex Features/004 Swept Boss_Base & Swept Cut.mp4 107.4 MB
- 09 - Let's Start Doing Assemblies/002 Creating First Assembly_ Shaft & Bush.mp4 105.9 MB
- 11 - Let's Create Simulations/001 An introduction To Motion Study.mp4 105.4 MB
- 04 - Let's Start Part Modeling/003 Different Display Tools.mp4 105.0 MB
- 01 - Let's Get Started with Basic Shapes/008 The Concept of Dimensional & Geometrical Relations.mp4 103.6 MB
- 11 - Let's Create Simulations/011 The Animation Wizard.mp4 102.8 MB
- 13 - Let's Create Drafting Sheets/003 Views Part 1_ Model Views, Projected Views, Auxiliary views.mp4 101.3 MB
- 04 - Let's Start Part Modeling/006 Some More Properties of an Extrude.mp4 100.2 MB
- 11 - Let's Create Simulations/006 Introduction to Basic Motion.mp4 100.0 MB
- 10 - Let's Learn Some Advance Assembly Tools/010 EXERCISE TIME_ Creating Compound Gear Train.mp4 100.0 MB
- 11 - Let's Create Simulations/003 Motor & It's Properties.mp4 99.9 MB
- 08 - Let's Gets Some Analysis Tools/002 Analyzing Dimensions, Mass Properties, Drafts & Curvature.mp4 97.8 MB
- 12 - Let's work with Sheet Metals in SolidWorks/003 Edge Flange & It's Properties.mp4 97.5 MB
- 10 - Let's Learn Some Advance Assembly Tools/006 Mechanical Mates Part 3_ Hinge Mate.mp4 97.2 MB
- 09 - Let's Start Doing Assemblies/009 Advance Mates, Part 4_ Linear_Linear Coupler Mate & Width Mate.mp4 96.8 MB
- 06 - Let's Create Patterns/004 3D Patterns_ Sketch Driven Patterns & Fill Patterns.mp4 92.3 MB
- 09 - Let's Start Doing Assemblies/007 Advance Mates, Part 2_ Path Mate.mp4 92.0 MB
- 10 - Let's Learn Some Advance Assembly Tools/009 Gear Mate with Different Gear Ratio.mp4 90.3 MB
- 06 - Let's Create Patterns/002 3D Patterns_ Circular Pattern & Curve Driven Pattern.mp4 89.9 MB
- 12 - Let's work with Sheet Metals in SolidWorks/008 Creating Corners in Sheet Metal.mp4 88.9 MB
- 10 - Let's Learn Some Advance Assembly Tools/007 Mechanical Mates Part 4_ Screw Mate.mp4 88.5 MB
- 12 - Let's work with Sheet Metals in SolidWorks/011 Creating Custom Forming Tool.mp4 88.3 MB
- 07 - Let's Learn Some Complex Features/007 Learn to Create Helix.mp4 88.0 MB
- 10 - Let's Learn Some Advance Assembly Tools/002 Assembly Features in Solidworks.mp4 84.5 MB
- 11 - Let's Create Simulations/008 Introduction to Motion Analysis.mp4 84.3 MB
- 04 - Let's Start Part Modeling/018 Rib Feature Part_ 2 & Creating Sections using Rib.mp4 84.1 MB
- 09 - Let's Start Doing Assemblies/010 Learn To Use Toolbox Components.mp4 83.8 MB
- 10 - Let's Learn Some Advance Assembly Tools/001 Creating Reference Part 4 _ Mate References.mp4 82.8 MB
- 07 - Let's Learn Some Complex Features/002 Creating References Part 2 _ Axis & Points.mp4 82.4 MB
- 11 - Let's Create Simulations/009 Bonus Lecture_ SolidWorks Simulation, Static Analysis.mp4 81.6 MB
- 04 - Let's Start Part Modeling/013 Some More Properties of an Edge Fillets.mp4 81.5 MB
- 05 - Let's Play with Model Appearance/002 Playing With Appearance_ Part 2.mp4 81.1 MB
- 13 - Let's Create Drafting Sheets/002 Introduction To Part Drafting.mp4 80.4 MB
- 07 - Let's Learn Some Complex Features/013 Draft Feature_ Parting Lines & Step Drafts.mp4 79.6 MB
- 11 - Let's Create Simulations/007 EXERCISE TIME_ Free Fall.mp4 79.5 MB
- 04 - Let's Start Part Modeling/009 Revolved Boss_Base & Revolved Cut.mp4 79.3 MB
- 08 - Let's Gets Some Analysis Tools/001 Selecting Materials for your Part.mp4 79.3 MB
- 12 - Let's work with Sheet Metals in SolidWorks/009 Adding a Sheet Metal Gusset.mp4 78.9 MB
- 07 - Let's Learn Some Complex Features/011 Loft Feature_ Centerline Parameter.mp4 78.7 MB
- 12 - Let's work with Sheet Metals in SolidWorks/002 Creating Basic Sheet Metal Part.mp4 78.0 MB
- 09 - Let's Start Doing Assemblies/008 Advance Mates, Part 3_ Limit Angle & Limit Distance Mates.mp4 77.3 MB
- 09 - Let's Start Doing Assemblies/004 Standard Mates & Mate Properties.mp4 76.4 MB
- 06 - Let's Create Patterns/005 Concept of 3D Mirror.mp4 75.0 MB
- 04 - Let's Start Part Modeling/008 EXERCISE TIME_ Use of Extrude & Extrude Cut.mp4 74.9 MB
- 01 - Let's Get Started with Basic Shapes/011 Sketching Basic Shapes Part 2_ Arcs & Slots.mp4 74.9 MB
- 12 - Let's work with Sheet Metals in SolidWorks/007 Extrude Cut, Simple Hole & Vent Features.mp4 74.6 MB
- 03 - Let's Get to Know about Advance Sketching Tools/002 Concept of Rapid & Repair Sketch.mp4 73.1 MB
- 04 - Let's Start Part Modeling/019 The Feature_ Wrap.mp4 73.0 MB
- 07 - Let's Learn Some Complex Features/016 Create Instant 3D's.mp4 72.6 MB
- 07 - Let's Learn Some Complex Features/008 Lofted Boss_Base & Lofted Cut.mp4 71.9 MB
- 11 - Let's Create Simulations/010 SolidWorks Simulation_ Thermal Analysis.mp4 70.7 MB
- 07 - Let's Learn Some Complex Features/012 Draft Feature_ Neutral Plane & Draft Properties.mp4 70.2 MB
- 11 - Let's Create Simulations/002 Motion Study Properties.mp4 70.0 MB
- 01 - Let's Get Started with Basic Shapes/010 Sketching Basic Shapes Part 1_ Circles & Rectangles.mp4 69.3 MB
- 09 - Let's Start Doing Assemblies/006 Advance Mates, Part 1_ Profile Center & Symmetric Mate.mp4 69.1 MB
- 10 - Let's Learn Some Advance Assembly Tools/005 Mechanical Mates Part 2_ Slot Mate.mp4 68.4 MB
- 04 - Let's Start Part Modeling/012 Solid Editing Features Part 1_ Edge Fillets.mp4 68.2 MB
- 13 - Let's Create Drafting Sheets/007 Creating Custom Sheet Format.mp4 67.7 MB
- 04 - Let's Start Part Modeling/007 EXERCISE TIME_ Creating Extrude Features.mp4 67.2 MB
- 12 - Let's work with Sheet Metals in SolidWorks/004 Hem & Milter Flanges.mp4 66.6 MB
- 01 - Let's Get Started with Basic Shapes/013 EXERCISE TIME_ Creating Fully Defined Sketch.mp4 65.7 MB
- 04 - Let's Start Part Modeling/016 Convert Entities_ Converting Edge into Sketch.mp4 65.0 MB
- 04 - Let's Start Part Modeling/002 Extrude Boss_Base & Extrude Cut.mp4 63.7 MB
- 02 - Let's Get to Know about Editing Tools/004 Editing Tools Part 4_ Sketch Fillets & Sketch Chamfers.mp4 63.3 MB
- 02 - Let's Get to Know about Editing Tools/001 Editing Tools Part 1_ Trim & Extend.mp4 62.1 MB
- 01 - Let's Get Started with Basic Shapes/009 EXERCISE TIME_ Creating Our First Sketch.mp4 61.3 MB
- 01 - Let's Get Started with Basic Shapes/004 Creating Dimensions Part 1_ Horizontal, Vertical & Smart Dimensions.mp4 61.1 MB
- 09 - Let's Start Doing Assemblies/011 Let's Explore the DESIGN LIBRARY.mp4 59.2 MB
- 05 - Let's Play with Model Appearance/001 Playing With Appearance_ Part 1.mp4 59.2 MB
- 12 - Let's work with Sheet Metals in SolidWorks/010 Using Forming Tools from Design Library.mp4 57.9 MB
- 04 - Let's Start Part Modeling/005 Parametric Properties & Feature Manager Tree.mp4 57.5 MB
- 04 - Let's Start Part Modeling/014 Solid Editing Features Part 2_ Chamfer Edge.mp4 56.5 MB
- 02 - Let's Get to Know about Editing Tools/003 Editing Tools Part 3_ Stretch & Offset.mp4 56.4 MB
- 01 - Let's Get Started with Basic Shapes/001 Get to Know about Lines in Solidworks.mp4 55.8 MB
- 02 - Let's Get to Know about Editing Tools/006 Sketch Patterns_ Linear & Circular.mp4 55.2 MB
- 04 - Let's Start Part Modeling/011 Creating Shell and Multi-Shell Features.mp4 54.9 MB
- 03 - Let's Get to Know about Advance Sketching Tools/003 Lets write some Text_.mp4 54.7 MB
- 11 - Let's Create Simulations/004 Belt Drive & Gear Simulations.mp4 53.4 MB
- 01 - Let's Get Started with Basic Shapes/014 Sorting Out Dislocated Toolbars.mp4 53.0 MB
- 07 - Let's Learn Some Complex Features/014 Creating Standard Holes Using Hole Wizard.mp4 52.8 MB
- 12 - Let's work with Sheet Metals in SolidWorks/012 Implementing Custom Forming Tool.mp4 52.6 MB
- 01 - Let's Get Started with Basic Shapes/003 Mouse Handling in Solidworks.mp4 52.5 MB
- 12 - Let's work with Sheet Metals in SolidWorks/005 Sketch & Jog Bends.mp4 52.2 MB
- 02 - Let's Get to Know about Editing Tools/002 Editing Tools Part 2_ Move, Copy, Rotate & Scale.mp4 51.9 MB
- 01 - Let's Get Started with Basic Shapes/002 Let's Get to Know Our Workspace.mp4 51.2 MB
- 09 - Let's Start Doing Assemblies/003 Concept of Fix & Float components.mp4 49.8 MB
- 09 - Let's Start Doing Assemblies/005 Standard Mates on Box Assembly.mp4 49.8 MB
- 01 - Let's Get Started with Basic Shapes/005 Creating Dimensions Part 2_ Ordinate Dimensions & Driven Dimensions.mp4 48.4 MB
- 11 - Let's Create Simulations/005 Use of Linear Motor(Actuator).mp4 46.7 MB
- 12 - Let's work with Sheet Metals in SolidWorks/001 Introduction to Sheet Metal in SolidWorks.mp4 46.4 MB
- 12 - Let's work with Sheet Metals in SolidWorks/006 Creating Folds & Unfolds.mp4 43.1 MB
- 03 - Let's Get to Know about Advance Sketching Tools/001 Learn About 3D Sketching in Solidworks.mp4 41.7 MB
- 01 - Let's Get Started with Basic Shapes/007 Using Relations to Define your Sketch(An Introduction).mp4 41.5 MB
- 02 - Let's Get to Know about Editing Tools/007 The Feature_ Mirror Entities.mp4 38.6 MB
- 09 - Let's Start Doing Assemblies/001 Introduction to Assembly.mp4 38.2 MB
- 07 - Let's Learn Some Complex Features/003 Creating References Part 3_ Co-Ordinates & Center of Mass.mp4 37.3 MB
- 01 - Let's Get Started with Basic Shapes/012 Sketching Basic Shapes Part 4_ Polygons.mp4 35.6 MB
- 04 - Let's Start Part Modeling/004 Using Model Surface as Sketch Plane.mp4 35.0 MB
- 01 - Let's Get Started with Basic Shapes/006 Creating Dimensions Part 3_ Path Length Dimensions.mp4 33.5 MB
- 04 - Let's Start Part Modeling/001 Introduction to Part Design.mp4 26.9 MB
- 13 - Let's Create Drafting Sheets/011 Conclusion_.mp4 10.0 MB
- 07 - Let's Learn Some Complex Features/34654356-Manual-8-Some-More-Designs-to-Practice.pdf 928.2 KB
- 09 - Let's Start Doing Assemblies/34654392-Manual-11-Long-Term-Project-in-Assembly.pdf 740.1 KB
- 01 - Let's Get Started with Basic Shapes/34654250-Manual-1-Basic-Sketch-Tools.pdf 661.7 KB
- 11 - Let's Create Simulations/35786740-Free-Fall.rar 657.9 KB
- 09 - Let's Start Doing Assemblies/34654358-Manual-10-Assembly-Exercises.pdf 605.6 KB
- 02 - Let's Get to Know about Editing Tools/34654260-Manual-2-Editing-Commands-Copy-Rotate-Scale-Mirror-Etc.pdf 456.8 KB
- 13 - Let's Create Drafting Sheets/34654380-Manual-12-Parts-Assemblies-Drawings.pdf 440.5 KB
- 10 - Let's Learn Some Advance Assembly Tools/35424716-Belt-Drive.zip 435.9 KB
- 04 - Let's Start Part Modeling/34654316-Manual-4-Basic-Part-Exercises.pdf 413.6 KB
- 02 - Let's Get to Know about Editing Tools/34654276-Manual-3-Sketch-Patterns.pdf 387.0 KB
- 04 - Let's Start Part Modeling/34654330-Manual-5-Use-of-Revolve-Features-Patterns.pdf 354.1 KB
- 07 - Let's Learn Some Complex Features/34654410-Manual-9-2D-to-3D-Conversions.pdf 350.5 KB
- 10 - Let's Learn Some Advance Assembly Tools/35424734-Cam-Follower.zip 334.0 KB
- 07 - Let's Learn Some Complex Features/34654350-Manual-7-Use-of-Loft-Feature.pdf 201.7 KB
- 10 - Let's Learn Some Advance Assembly Tools/35424738-Slot-Mate.zip 95.4 KB
- 07 - Let's Learn Some Complex Features/001 Creating References Part 1_ Reference Planes_en.vtt 23.1 KB
- 13 - Let's Create Drafting Sheets/008 Know about Annotations & Symbols_en.vtt 21.9 KB
- 13 - Let's Create Drafting Sheets/001 Introduction to Drafting_en.vtt 21.7 KB
- 07 - Let's Learn Some Complex Features/010 Learn to Create Advance Curves_en.vtt 21.7 KB
- 06 - Let's Create Patterns/006 EXERCISE TIME_ Creating Burj Khalifa in Solidworks_en.vtt 21.6 KB
- 13 - Let's Create Drafting Sheets/010 Finally_ Creating Bill of Materials_en.vtt 21.0 KB
- 13 - Let's Create Drafting Sheets/004 Views Part 2_ Section Views & Detailed Views_en.vtt 19.5 KB
- 01 - Let's Get Started with Basic Shapes/008 The Concept of Dimensional & Geometrical Relations_en.vtt 18.1 KB
- 13 - Let's Create Drafting Sheets/009 Introduction To Assembly Drafting_en.vtt 17.9 KB
- 07 - Let's Learn Some Complex Features/009 Properties of Loft Feature_en.vtt 17.8 KB
- 02 - Let's Get to Know about Editing Tools/008 EXERCISE TIME_ Use of Circular Pattern_en.vtt 16.7 KB
- 10 - Let's Learn Some Advance Assembly Tools/008 Mechanical Mates Part 5_ Gear Mate_en.vtt 16.6 KB
- 13 - Let's Create Drafting Sheets/005 Views Part 3_ Broken Out Views & Crop Views_en.vtt 16.3 KB
- 09 - Let's Start Doing Assemblies/002 Creating First Assembly_ Shaft & Bush_en.vtt 15.9 KB
- 07 - Let's Learn Some Complex Features/006 EXERCISE TIME_ Use of Swept Feature_en.vtt 15.7 KB
- 10 - Let's Learn Some Advance Assembly Tools/011 Mechanical Mates Part 6_ Rack & Pinion Mate_en.vtt 15.5 KB
- 11 - Let's Create Simulations/001 An introduction To Motion Study_en.vtt 15.4 KB
- 06 - Let's Create Patterns/001 3D Patterns_ Linear Pattern & Pattern Properties_en.vtt 15.3 KB
- 04 - Let's Start Part Modeling/017 Creating Ribs_ The Support Feature_en.vtt 15.0 KB
- 07 - Let's Learn Some Complex Features/015 Creating Threads using Thread Tool_en.vtt 15.0 KB
- 10 - Let's Learn Some Advance Assembly Tools/004 Mechanical Mates Part 1_ Cam Follower Mate_en.vtt 15.0 KB
- 13 - Let's Create Drafting Sheets/003 Views Part 1_ Model Views, Projected Views, Auxiliary views_en.vtt 15.0 KB
- 11 - Let's Create Simulations/006 Introduction to Basic Motion_en.vtt 14.8 KB
- 04 - Let's Start Part Modeling/006 Some More Properties of an Extrude_en.vtt 14.6 KB
- 07 - Let's Learn Some Complex Features/005 Some More Properties of Swept Feature_en.vtt 14.6 KB
- 04 - Let's Start Part Modeling/015 EXERCISE TIME_ Use of Fillets & Chamfer_en.vtt 14.5 KB
- 11 - Let's Create Simulations/003 Motor & It's Properties_en.vtt 14.5 KB
- 09 - Let's Start Doing Assemblies/007 Advance Mates, Part 2_ Path Mate_en.vtt 14.4 KB
- 12 - Let's work with Sheet Metals in SolidWorks/002 Creating Basic Sheet Metal Part_en.vtt 14.2 KB
- 02 - Let's Get to Know about Editing Tools/005 EXERCISE TIME_ Use of Trim_en.vtt 14.1 KB
- 04 - Let's Start Part Modeling/003 Different Display Tools_en.vtt 14.0 KB
- 11 - Let's Create Simulations/011 The Animation Wizard_en.vtt 13.8 KB
- 08 - Let's Gets Some Analysis Tools/002 Analyzing Dimensions, Mass Properties, Drafts & Curvature_en.vtt 13.7 KB
- 11 - Let's Create Simulations/009 Bonus Lecture_ SolidWorks Simulation, Static Analysis_en.vtt 13.6 KB
- 09 - Let's Start Doing Assemblies/010 Learn To Use Toolbox Components_en.vtt 13.6 KB
- 12 - Let's work with Sheet Metals in SolidWorks/003 Edge Flange & It's Properties_en.vtt 13.6 KB
- 13 - Let's Create Drafting Sheets/006 Editing Default Sheet Format_en.vtt 13.5 KB
- 13 - Let's Create Drafting Sheets/002 Introduction To Part Drafting_en.vtt 13.3 KB
- 07 - Let's Learn Some Complex Features/007 Learn to Create Helix_en.vtt 12.9 KB
- 10 - Let's Learn Some Advance Assembly Tools/003 Assembly Feature_ Belt_Chain Drive_en.vtt 12.6 KB
- 07 - Let's Learn Some Complex Features/004 Swept Boss_Base & Swept Cut_en.vtt 12.4 KB
- 10 - Let's Learn Some Advance Assembly Tools/007 Mechanical Mates Part 4_ Screw Mate_en.vtt 12.3 KB
- 03 - Let's Get to Know about Advance Sketching Tools/002 Concept of Rapid & Repair Sketch_en.vtt 12.3 KB
- 04 - Let's Start Part Modeling/010 EXERCISE TIME_ Use of Revolve Feature_en.vtt 12.3 KB
- 07 - Let's Learn Some Complex Features/012 Draft Feature_ Neutral Plane & Draft Properties_en.vtt 12.0 KB
- 09 - Let's Start Doing Assemblies/009 Advance Mates, Part 4_ Linear_Linear Coupler Mate & Width Mate_en.vtt 12.0 KB
- 02 - Let's Get to Know about Editing Tools/004 Editing Tools Part 4_ Sketch Fillets & Sketch Chamfers_en.vtt 11.9 KB
- 04 - Let's Start Part Modeling/009 Revolved Boss_Base & Revolved Cut_en.vtt 11.9 KB
- 08 - Let's Gets Some Analysis Tools/001 Selecting Materials for your Part_en.vtt 11.8 KB
- 09 - Let's Start Doing Assemblies/006 Advance Mates, Part 1_ Profile Center & Symmetric Mate_en.vtt 11.8 KB
- 06 - Let's Create Patterns/002 3D Patterns_ Circular Pattern & Curve Driven Pattern_en.vtt 11.7 KB
- 09 - Let's Start Doing Assemblies/008 Advance Mates, Part 3_ Limit Angle & Limit Distance Mates_en.vtt 11.6 KB
- 07 - Let's Learn Some Complex Features/002 Creating References Part 2 _ Axis & Points_en.vtt 11.5 KB
- 02 - Let's Get to Know about Editing Tools/001 Editing Tools Part 1_ Trim & Extend_en.vtt 11.4 KB
- 04 - Let's Start Part Modeling/012 Solid Editing Features Part 1_ Edge Fillets_en.vtt 11.4 KB
- 01 - Let's Get Started with Basic Shapes/007 Using Relations to Define your Sketch(An Introduction)_en.vtt 11.3 KB
- 06 - Let's Create Patterns/003 EXERCISE TIME_ Learn to use Pattern_en.vtt 11.3 KB
- 12 - Let's work with Sheet Metals in SolidWorks/008 Creating Corners in Sheet Metal_en.vtt 11.3 KB
- 10 - Let's Learn Some Advance Assembly Tools/006 Mechanical Mates Part 3_ Hinge Mate_en.vtt 11.1 KB
- 10 - Let's Learn Some Advance Assembly Tools/010 EXERCISE TIME_ Creating Compound Gear Train_en.vtt 11.1 KB
- 13 - Let's Create Drafting Sheets/007 Creating Custom Sheet Format_en.vtt 11.1 KB
- 05 - Let's Play with Model Appearance/001 Playing With Appearance_ Part 1_en.vtt 11.1 KB
- 01 - Let's Get Started with Basic Shapes/011 Sketching Basic Shapes Part 2_ Arcs & Slots_en.vtt 11.0 KB
- 10 - Let's Learn Some Advance Assembly Tools/009 Gear Mate with Different Gear Ratio_en.vtt 10.9 KB
- 10 - Let's Learn Some Advance Assembly Tools/001 Creating Reference Part 4 _ Mate References_en.vtt 10.8 KB
- 07 - Let's Learn Some Complex Features/016 Create Instant 3D's_en.vtt 10.8 KB
- 06 - Let's Create Patterns/005 Concept of 3D Mirror_en.vtt 10.7 KB
- 04 - Let's Start Part Modeling/013 Some More Properties of an Edge Fillets_en.vtt 10.7 KB
- 12 - Let's work with Sheet Metals in SolidWorks/011 Creating Custom Forming Tool_en.vtt 10.7 KB
- 04 - Let's Start Part Modeling/002 Extrude Boss_Base & Extrude Cut_en.vtt 10.6 KB
- 04 - Let's Start Part Modeling/005 Parametric Properties & Feature Manager Tree_en.vtt 10.6 KB
- 07 - Let's Learn Some Complex Features/011 Loft Feature_ Centerline Parameter_en.vtt 10.6 KB
- 07 - Let's Learn Some Complex Features/013 Draft Feature_ Parting Lines & Step Drafts_en.vtt 10.5 KB
- 01 - Let's Get Started with Basic Shapes/004 Creating Dimensions Part 1_ Horizontal, Vertical & Smart Dimensions_en.vtt 10.5 KB
- 10 - Let's Learn Some Advance Assembly Tools/002 Assembly Features in Solidworks_en.vtt 10.5 KB
- 11 - Let's Create Simulations/007 EXERCISE TIME_ Free Fall_en.vtt 10.5 KB
- 11 - Let's Create Simulations/002 Motion Study Properties_en.vtt 10.4 KB
- 01 - Let's Get Started with Basic Shapes/009 EXERCISE TIME_ Creating Our First Sketch_en.vtt 10.4 KB
- 06 - Let's Create Patterns/004 3D Patterns_ Sketch Driven Patterns & Fill Patterns_en.vtt 10.3 KB
- 11 - Let's Create Simulations/008 Introduction to Motion Analysis_en.vtt 10.2 KB
- 02 - Let's Get to Know about Editing Tools/003 Editing Tools Part 3_ Stretch & Offset_en.vtt 10.2 KB
- 11 - Let's Create Simulations/010 SolidWorks Simulation_ Thermal Analysis_en.vtt 10.2 KB
- 07 - Let's Learn Some Complex Features/008 Lofted Boss_Base & Lofted Cut_en.vtt 10.1 KB
- 01 - Let's Get Started with Basic Shapes/001 Get to Know about Lines in Solidworks_en.vtt 10.1 KB
- 12 - Let's work with Sheet Metals in SolidWorks/009 Adding a Sheet Metal Gusset_en.vtt 9.9 KB
- 05 - Let's Play with Model Appearance/002 Playing With Appearance_ Part 2_en.vtt 9.9 KB
- 09 - Let's Start Doing Assemblies/004 Standard Mates & Mate Properties_en.vtt 9.8 KB
- 02 - Let's Get to Know about Editing Tools/002 Editing Tools Part 2_ Move, Copy, Rotate & Scale_en.vtt 9.8 KB
- 01 - Let's Get Started with Basic Shapes/010 Sketching Basic Shapes Part 1_ Circles & Rectangles_en.vtt 9.7 KB
- 04 - Let's Start Part Modeling/019 The Feature_ Wrap_en.vtt 9.7 KB
- 09 - Let's Start Doing Assemblies/001 Introduction to Assembly_en.vtt 9.7 KB
- 04 - Let's Start Part Modeling/007 EXERCISE TIME_ Creating Extrude Features_en.vtt 9.6 KB
- 04 - Let's Start Part Modeling/008 EXERCISE TIME_ Use of Extrude & Extrude Cut_en.vtt 9.5 KB
- 04 - Let's Start Part Modeling/018 Rib Feature Part_ 2 & Creating Sections using Rib_en.vtt 9.4 KB
- 12 - Let's work with Sheet Metals in SolidWorks/007 Extrude Cut, Simple Hole & Vent Features_en.vtt 9.3 KB
- 09 - Let's Start Doing Assemblies/011 Let's Explore the DESIGN LIBRARY_en.vtt 9.1 KB
- 02 - Let's Get to Know about Editing Tools/006 Sketch Patterns_ Linear & Circular_en.vtt 9.0 KB
- 01 - Let's Get Started with Basic Shapes/002 Let's Get to Know Our Workspace_en.vtt 8.9 KB
- 04 - Let's Start Part Modeling/011 Creating Shell and Multi-Shell Features_en.vtt 8.8 KB
- 12 - Let's work with Sheet Metals in SolidWorks/010 Using Forming Tools from Design Library_en.vtt 8.8 KB
- 12 - Let's work with Sheet Metals in SolidWorks/001 Introduction to Sheet Metal in SolidWorks_en.vtt 8.8 KB
- 12 - Let's work with Sheet Metals in SolidWorks/004 Hem & Milter Flanges_en.vtt 8.6 KB
- 07 - Let's Learn Some Complex Features/014 Creating Standard Holes Using Hole Wizard_en.vtt 8.5 KB
- 10 - Let's Learn Some Advance Assembly Tools/005 Mechanical Mates Part 2_ Slot Mate_en.vtt 8.5 KB
- 01 - Let's Get Started with Basic Shapes/013 EXERCISE TIME_ Creating Fully Defined Sketch_en.vtt 8.5 KB
- 01 - Let's Get Started with Basic Shapes/005 Creating Dimensions Part 2_ Ordinate Dimensions & Driven Dimensions_en.vtt 8.3 KB
- 12 - Let's work with Sheet Metals in SolidWorks/005 Sketch & Jog Bends_en.vtt 8.3 KB
- 04 - Let's Start Part Modeling/016 Convert Entities_ Converting Edge into Sketch_en.vtt 8.2 KB
- 09 - Let's Start Doing Assemblies/003 Concept of Fix & Float components_en.vtt 8.1 KB
- 03 - Let's Get to Know about Advance Sketching Tools/003 Lets write some Text__en.vtt 7.9 KB
- 04 - Let's Start Part Modeling/014 Solid Editing Features Part 2_ Chamfer Edge_en.vtt 7.9 KB
- 01 - Let's Get Started with Basic Shapes/003 Mouse Handling in Solidworks_en.vtt 7.7 KB
- 11 - Let's Create Simulations/004 Belt Drive & Gear Simulations_en.vtt 7.5 KB
- 01 - Let's Get Started with Basic Shapes/014 Sorting Out Dislocated Toolbars_en.vtt 7.4 KB
- 11 - Let's Create Simulations/005 Use of Linear Motor(Actuator)_en.vtt 7.4 KB
- 03 - Let's Get to Know about Advance Sketching Tools/001 Learn About 3D Sketching in Solidworks_en.vtt 7.1 KB
- 02 - Let's Get to Know about Editing Tools/007 The Feature_ Mirror Entities_en.vtt 6.8 KB
- 12 - Let's work with Sheet Metals in SolidWorks/006 Creating Folds & Unfolds_en.vtt 6.7 KB
- 09 - Let's Start Doing Assemblies/005 Standard Mates on Box Assembly_en.vtt 6.3 KB
- 01 - Let's Get Started with Basic Shapes/012 Sketching Basic Shapes Part 4_ Polygons_en.vtt 6.2 KB
- 01 - Let's Get Started with Basic Shapes/006 Creating Dimensions Part 3_ Path Length Dimensions_en.vtt 6.1 KB
- 12 - Let's work with Sheet Metals in SolidWorks/012 Implementing Custom Forming Tool_en.vtt 6.0 KB
- 04 - Let's Start Part Modeling/001 Introduction to Part Design_en.vtt 5.6 KB
- 07 - Let's Learn Some Complex Features/003 Creating References Part 3_ Co-Ordinates & Center of Mass_en.vtt 5.6 KB
- 04 - Let's Start Part Modeling/004 Using Model Surface as Sketch Plane_en.vtt 5.4 KB
- 13 - Let's Create Drafting Sheets/011 Conclusion__en.vtt 3.6 KB
- Readme.txt 143 bytes
Download Torrent
Related Resources
Copyright Infringement
If the content above is not authorized, please contact us via anywarmservice[AT]gmail.com. Remember to include the full url in your complaint.