[Tutorialsplanet.NET] Udemy - Mastering Microcontroller with Embedded Driver Development

Creation Time	April 3, 2024, 5:35 p.m.
Last Access Time	Sept. 20, 2024, 6:43 p.m.
File Size	14.0 GB
Keywords	Tutorialsplanet Development Embedded Driver Microcontroller - Udemy Mastering NET with
Total Requests	39
Total Files	581
Magnet Link	Please wait ...
	Download (Magnet Link) Play (Watch Online)

34. Exercise GPIO interrupts/1. Exercise External button interrupt implementation.mp4 261.1 MB
68. Exercise/1. Exercise Testing I2C interrupt APIs part 1.mp4 230.8 MB
42. SPI Driver API Implementation SPI init/1. SPI user configuration options writing and register bit definition macros.mp4 184.9 MB
61. I2C pull up resistance , rise time and bus capacitance/1. I2C pull up resistance , rise time and bus capacitance discussion.mp4 176.9 MB
70. Exercise/2. Exercise Coding Part 1.mp4 172.6 MB
9. Embedded Code Debugging Tools n Tips/7. Embedded Code Debugging Part-7 Memory Windows.mp4 169.0 MB
44. Exercise SPI Send Data/6. Exercise Testing.mp4 162.9 MB
64. Exercise/3. Exercise Coding Part 2.mp4 162.3 MB
77. Exercise/1. Exercise USART send data to arduino.mp4 159.9 MB
33. GPIO pin Interrupt configuration/4. GPIO pin Interrupt configuration coding Part 4.mp4 156.5 MB
16. Understanding MCU Specific Header file/2. Understanding MCU Specific header file Part 2.mp4 154.4 MB
47. Exercise SPI receive data/4. Exercise Coding Part 3.mp4 154.2 MB
26. Structuring peripheral registers/2. Structuring peripheral registers.mp4 149.5 MB
15/2. Understanding MCU interrupt Design , NVIC, Interrupt handling Part 2.mp4 142.2 MB
33. GPIO pin Interrupt configuration/7. GPIO pin Interrupt configuration coding Part 7.mp4 139.2 MB
67. I2C IRQ handler implementation/6. I2C IRQ handler implementation Part 6.mp4 137.0 MB
50. SPI Driver API IRQ handling/4. SPI IRQ handler implementation Part 3.mp4 133.7 MB
63. I2C Driver API I2C Master receive data/1. I2C transfer sequence diagram for master receiving data.mp4 131.6 MB
11. MCU Bus Interfaces/3. MCU Bus Interfaces Explanation Part 3 QA session.mp4 124.7 MB
47. Exercise SPI receive data/2. Exercise Coding Part 1.mp4 124.0 MB
32. Exercise/1. Exercise LED toggling with PUSH PULL configuration.mp4 122.4 MB
32. Exercise/3. Exercise Handling on board LED and Button.mp4 122.3 MB
62. Exercise/2. Exercise Coding Part 1.mp4 120.6 MB
60. I2C Driver API I2C Master send data/1. I2C transfer sequence diagram for master sending data.mp4 120.2 MB
50. SPI Driver API IRQ handling/3. SPI IRQ handler implementation Part 2.mp4 119.1 MB
34. Exercise GPIO interrupts/2. Exercise Debugging the application Part 1.mp4 118.0 MB
75. USART driver development/3. Configuration options and USART registers.mp4 114.6 MB
2. Development board used in our courses/2. STM32F4 Discovery and Nucleo Board Details.mp4 114.2 MB
59. I2C Driver API I2C Init/1. Implementation of I2C init API Part 1.mp4 113.8 MB
67. I2C IRQ handler implementation/1. I2C IRQ handler implementation Part 1.mp4 108.4 MB
52. I2C introduction and I2C signals/1. I2C introduction and differences with SPI.mp4 107.1 MB
58. I2C serial clock discussion(SCLK)/1. I2C serial clock settings with explanation.mp4 103.3 MB
32. Exercise/4. Exercise Connecting external button and circuit explanation.mp4 102.3 MB
63. I2C Driver API I2C Master receive data/3. Implementation of I2C master receive data API Part 1.mp4 102.2 MB
8. LEDButton Exercises with OpenSTM32 SystemWorkbench/1. Creating First project using OpenSTM32 System workbench LED Toggling App.mp4 100.2 MB
38. SPI CPOL and CPHA discussion/1. SPI CPOL and CPHA discussion.mp4 99.7 MB
67. I2C IRQ handler implementation/3. I2C IRQ handler implementation Part 3.mp4 99.0 MB
33. GPIO pin Interrupt configuration/6. GPIO pin Interrupt configuration coding Part 6.mp4 98.7 MB
9. Embedded Code Debugging Tools n Tips/8. Exercise-Copying data from Flash to RAM.mp4 98.5 MB
30. GPIO driver API Implementation GPIO init and de-init/4. Configuring Alternate function registers.mp4 97.7 MB
33. GPIO pin Interrupt configuration/5. GPIO pin Interrupt configuration coding Part 5.mp4 97.0 MB
47. Exercise SPI receive data/3. Exercise Coding Part 2.mp4 96.3 MB
19. GPIO Programming structure and Registers/4. Input configuration of a Microcontroller's GPIO Pin.mp4 95.1 MB
8. LEDButton Exercises with OpenSTM32 SystemWorkbench/5. Adding button support.mp4 94.9 MB
45. Exercise STM32 master and Arduino Slave communication/5. Exercise Testing.mp4 94.3 MB
12. Understanding MCU Clocks and Details/2. Understanding MCU Clocking System Part2.mp4 91.2 MB
10. Understanding MCU Memory Map/3. Understanding Memory Map of the MCU Part 3.mp4 91.1 MB
16. Understanding MCU Specific Header file/1. Understanding MCU Specific header file Part 1.mp4 89.2 MB
64. Exercise/5. Exercise Testing repeated start.mp4 87.3 MB
69. I2C slave programming/2. I2C transfer sequence diagram for slave transmitter.mp4 87.0 MB
28. GPIO driver API requirements and handle structure/4. Driver API input parameters and return types.mp4 86.7 MB
65. I2C Interrupts and IRQ numbers/2. I2C errors and importance of BUSY flag.mp4 86.1 MB
54. Understanding I2C Protocol/2. I2C START and STOP conditions.mp4 85.8 MB
27. Writing Clock enable and disable macros/1. Writing peripheral clock enable and disable C Macros.mp4 84.6 MB
44. Exercise SPI Send Data/4. Exercise Code implementation Part 2.mp4 83.1 MB
59. I2C Driver API I2C Init/3. Implementation of I2C init API Part 3.mp4 82.8 MB
33. GPIO pin Interrupt configuration/1. GPIO pin Interrupt configuration coding Part 1.mp4 80.0 MB
50. SPI Driver API IRQ handling/2. SPI IRQ handler implementation Part 1.mp4 77.7 MB
30. GPIO driver API Implementation GPIO init and de-init/1. Writing user configurable macros.mp4 77.2 MB
43. SPI Driver API Implementation Send Data/1. Implementation of SPI send data API Part 1.mp4 74.0 MB
8. LEDButton Exercises with OpenSTM32 SystemWorkbench/4. Writing LED Toggling Application ( For Discovery).mp4 73.7 MB
9. Embedded Code Debugging Tools n Tips/5. Embedded Code Debugging Part-5 Call Stack Usage.mp4 73.2 MB
76. USART oversampling and baudrate/4. USART baudrate coding.mp4 73.2 MB
47. Exercise SPI receive data/1. Exercise SPI command and response based communication.mp4 73.1 MB
13. Understanding MCU Peripheral Clock Control/3. Exercise-Making HSE as System Clock.mp4 72.8 MB
45. Exercise STM32 master and Arduino Slave communication/2. Exercise Coding Part 1.mp4 70.9 MB
69. I2C slave programming/3. I2C slave support in driver.mp4 70.4 MB
60. I2C Driver API I2C Master send data/2. Implementation of I2C master sending data API Part 1.mp4 69.8 MB
4. OpenSTM32 System Workbench installation/2. Downloading and Installing OpenSTM32 System-Workbench.mp4 69.1 MB
8. LEDButton Exercises with OpenSTM32 SystemWorkbench/2. Writing LED Toggling Application ( For Nucleo).mp4 68.3 MB
76. USART oversampling and baudrate/1. USART oversampling.mp4 68.2 MB
32. Exercise/2. Exercise LED toggling with OPEN DRAIN configuration.mp4 67.4 MB
76. USART oversampling and baudrate/2. USART Baud rate calculation Part-2.mp4 67.1 MB
38. SPI CPOL and CPHA discussion/2. SPI CPOL and CPHA waveform example.mp4 66.7 MB
5. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/2. KEIL-MDK-5 Installation.mp4 65.7 MB
48. SPI interrupts/1. SPI peripheral interrupting the processor.mp4 65.2 MB
35. SPI introduction and bus details/1. Introduction to SPI Bus.mp4 64.9 MB
30. GPIO driver API Implementation GPIO init and de-init/2. Implementation of GPIO init API.mp4 64.7 MB
33. GPIO pin Interrupt configuration/2. GPIO pin Interrupt configuration coding Part 2.mp4 64.1 MB
57. I2C driver API requirements and config structures/1. I2C driver API requirements.mp4 63.8 MB
7. LEDButton Exercises using BSPs/2. Exercise LED Toggling App using Board BSP APIs.mp4 63.5 MB
28. GPIO driver API requirements and handle structure/3. Driver API requirements and adding API prototypes.mp4 63.5 MB
45. Exercise STM32 master and Arduino Slave communication/1. Exercise Communicating with Arduino slave.mp4 61.9 MB
36. SPI bus configuration and functional block diagram/2. SPI functional block diagram explanation.mp4 61.9 MB
25/3. Defining base addresses of different bus domains.mp4 60.2 MB
40. SPI Driver API requirements and configuration structure/1. SPI API requirements and configuration items.mp4 60.2 MB
43. SPI Driver API Implementation Send Data/3. Implementation of SPI send data API Part 3.mp4 59.6 MB
5. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/4. KEIL-MDK-5 Pack Installation.mp4 58.8 MB
54. Understanding I2C Protocol/1. I2C Protocol explanation.mp4 58.4 MB
19. GPIO Programming structure and Registers/3. GPIO Mode register(used to set mode for a pin).mp4 58.2 MB
40. SPI Driver API requirements and configuration structure/3. SPI adding API prototypes to driver header file.mp4 57.2 MB
67. I2C IRQ handler implementation/2. I2C IRQ handler implementation Part 2.mp4 57.0 MB
57. I2C driver API requirements and config structures/3. I2C user configurable macros.mp4 57.0 MB
13. Understanding MCU Peripheral Clock Control/4. Exercise-Making HSE as System Clock Contd..mp4 56.9 MB
75. USART driver development/6. USART Driver API Send data.mp4 56.3 MB
69. I2C slave programming/1. I2C slave programming discussion.mp4 56.1 MB
6. About the board/2. About USB logic analyzer.mp4 55.9 MB
64. Exercise/2. Exercise Coding Part 1.mp4 55.5 MB
62. Exercise/4. Exercise Testing.mp4 55.2 MB
21/2. Alternate functionality settings of a GPIO pin with example Part 1.mp4 54.7 MB
44. Exercise SPI Send Data/5. Exercise Code implementation Part 3.mp4 54.7 MB
8. LEDButton Exercises with OpenSTM32 SystemWorkbench/6. OpenSTM32 System Workbench Debugging.mp4 54.3 MB
49. SPI interrupt mode APIs/1. SPI interrupt mode API implementation and changes to handle structure.mp4 54.1 MB
20. GPIO Registers SPEED, PULL UPDOWN, IDR and ODR/1. GPIO output speed register and its applicability.mp4 53.9 MB
49. SPI interrupt mode APIs/2. SPI send data with interrupt API implementation.mp4 52.9 MB
41. SPI Driver API Implementation Clock control/1. Implementation of SPI peripheral clock control API.mp4 52.8 MB
42. SPI Driver API Implementation SPI init/3. Implementation of SPI init API Part 2.mp4 52.8 MB
67. I2C IRQ handler implementation/8. I2C IRQ handler implementation Part 8.mp4 52.7 MB
60. I2C Driver API I2C Master send data/4. Implementation of I2C master sending data API Part 3.mp4 52.1 MB
67. I2C IRQ handler implementation/7. I2C IRQ handler implementation Part 7.mp4 51.8 MB
59. I2C Driver API I2C Init/2. Implementation of I2C init API Part 2.mp4 51.3 MB
55. I2C master and slave communication/2. Understanding repeated START condition.mp4 51.1 MB
34. Exercise GPIO interrupts/3. Exercise Debugging the application Part 2.mp4 50.7 MB
2. Development board used in our courses/1. About MCU Development board.mp4 50.6 MB
43. SPI Driver API Implementation Send Data/2. Implementation of SPI send data API Part 2.mp4 50.5 MB
25/6. Defining base addresses conclusion.mp4 49.1 MB
64. Exercise/1. Exercise Reading data from the I2C slave.mp4 48.8 MB
36. SPI bus configuration and functional block diagram/1. SPI bus configuration discussion full duplex, half duplex and simplex.mp4 48.4 MB
21/1. Alternate functionality settings of a GPIO pin with example Part 1.mp4 48.2 MB
37. STM32 NSS pin settings and management/2. STM32 SPI hardware and software slave managements.mp4 48.1 MB
75. USART driver development/1. USART driver development confiugrable items.mp4 46.9 MB
30. GPIO driver API Implementation GPIO init and de-init/5. GPIO de-init API implementation.mp4 46.4 MB
12. Understanding MCU Clocks and Details/3. Exercise-Using HSI Clock and Clock MeasurementPart 1.mp4 45.8 MB
44. Exercise SPI Send Data/3. Exercise Code implementation Part 1.mp4 45.3 MB
61. I2C pull up resistance , rise time and bus capacitance/2. I2C rise time calculation.mp4 44.7 MB
12. Understanding MCU Clocks and Details/1. Understanding MCU Clocking SystemPart1.mp4 44.7 MB
11. MCU Bus Interfaces/1. MCU Bus Interfaces Explanation Part 1 I-CodeD-CodeS-Bus.mp4 44.5 MB
26. Structuring peripheral registers/3. Peripheral definition macros.mp4 44.5 MB
78. USART interrupts/2. Exercise.mp4 44.1 MB
28. GPIO driver API requirements and handle structure/2. Defining GPIO handle and configuration structure.mp4 43.9 MB
45. Exercise STM32 master and Arduino Slave communication/4. Exercise Coding Part 3.mp4 43.1 MB
67. I2C IRQ handler implementation/5. I2C IRQ handler implementation Part 5.mp4 42.5 MB
50. SPI Driver API IRQ handling/1. SPI Handling of interrupts.mp4 42.3 MB
19. GPIO Programming structure and Registers/6. Output Configuration of a GPIO Pin in open drain mode.mp4 41.7 MB
65. I2C Interrupts and IRQ numbers/1. I2C IRQ and interrupt discussion.mp4 41.6 MB
64. Exercise/4. Exercise Coding Part 3.mp4 41.5 MB
70. Exercise/4. Exercise Modifying I2C transactions.mp4 41.2 MB
12. Understanding MCU Clocks and Details/4. Exercise-Using HSI Clock and Clock Measurement Part 2.mp4 41.1 MB
62. Exercise/3. Exercise Coding Part 2.mp4 40.7 MB
35. SPI introduction and bus details/2. SPI comparison with other protocols.mp4 40.1 MB
44. Exercise SPI Send Data/2. Finding out microcontroller pins to communicate over SPI2.mp4 39.9 MB
39. SPI serial clock discussion/2. SPI Serial clock frequency.mp4 39.9 MB
9. Embedded Code Debugging Tools n Tips/6. Embedded Code Debugging Part-6 Watch Windows.mp4 39.8 MB
65. I2C Interrupts and IRQ numbers/4. I2C adding interrupt related macros and interrupt APIs.mp4 39.7 MB
45. Exercise STM32 master and Arduino Slave communication/3. Exercise Coding Part 2.mp4 39.6 MB
14. Understanding MCU Vector table/1. Understanding MCU Vector Table Part-1.mp4 39.6 MB
63. I2C Driver API I2C Master receive data/4. Implementation of I2C master receive data API Part 2.mp4 39.5 MB
67. I2C IRQ handler implementation/9. I2C error IRQ handler implementation.mp4 39.5 MB
4. OpenSTM32 System Workbench installation/5. STM32CubeMX Installation.mp4 39.2 MB
60. I2C Driver API I2C Master send data/5. Implementation of I2C master sending data API Part 4.mp4 38.4 MB
57. I2C driver API requirements and config structures/4. I2C API prototypes.mp4 38.2 MB
5. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/6. Creating a KEIL Project.mp4 37.9 MB
14. Understanding MCU Vector table/2. Understanding MCU Vector Table Part-2.mp4 37.3 MB
35. SPI introduction and bus details/5. SPI behind the scene data communication principle.mp4 36.9 MB
27. Writing Clock enable and disable macros/2. Project include settings and build.mp4 36.8 MB
31. GPIO driver API Implementation GPIO data read and write/1. Implementation of GPIO input port read and input pin read APIs.mp4 36.6 MB
53. I2C modes/1. I2C standard and fast mode.mp4 36.5 MB
62. Exercise/1. Exercise Introduction.mp4 36.4 MB
15/1. Understanding MCU interrupt Design , NVIC, Interrupt handling Part 1.mp4 35.9 MB
32. Exercise/5. Exercise Testing button interface.mp4 35.9 MB
57. I2C driver API requirements and config structures/5. Steps for I2C init implementation.mp4 35.8 MB
52. I2C introduction and I2C signals/2. I2C SDA and SCL signals.mp4 35.2 MB
13. Understanding MCU Peripheral Clock Control/2. Exercise EnablingDisabling Peripheral Clock.mp4 34.9 MB
67. I2C IRQ handler implementation/4. I2C IRQ handler implementation Part 4.mp4 34.4 MB
42. SPI Driver API Implementation SPI init/2. Implementation of SPI init API Part 1.mp4 33.3 MB
54. Understanding I2C Protocol/4. I2C Data validity.mp4 33.0 MB
2. Development board used in our courses/4. ST Link Firmware Upgrade.mp4 32.3 MB
2. Development board used in our courses/3. ST-Link Driver Installation.mp4 32.3 MB
54. Understanding I2C Protocol/3. I2C ACK and NACK.mp4 32.1 MB
10. Understanding MCU Memory Map/2. Understanding Memory Map of the MCU Part 2.mp4 32.0 MB
24. GPIO driver development overview and Project creation/2. MCU Specific header file and its contents.mp4 30.8 MB
25/1. Writing base address C macros for MCU's embedded memories Part 1.mp4 30.5 MB
56. STM32 I2C functional block diagram/1. I2C functional block diagram.mp4 30.3 MB
77. Exercise/2. communicating with PC over UART.mp4 28.8 MB
60. I2C Driver API I2C Master send data/3. Implementation of I2C master sending data API Part 2.mp4 28.2 MB
55. I2C master and slave communication/1. Example of master writing to slave.mp4 28.2 MB
76. USART oversampling and baudrate/3. USART Baud rate calculation Part-2.mp4 28.2 MB
60. I2C Driver API I2C Master send data/6. Implementation of I2C master sending data API Part 5.mp4 28.1 MB
35. SPI introduction and bus details/4. SPI Minimum bus configuration.mp4 27.8 MB
28. GPIO driver API requirements and handle structure/5. Driver empty API implementation and documentation.mp4 27.5 MB
24. GPIO driver development overview and Project creation/3. New project creation and creating MCU specific headerfile.mp4 27.3 MB
65. I2C Interrupts and IRQ numbers/3. I2C handle structure modification.mp4 27.3 MB
17. Importance of Volatile Keyword/1. Importance of Volatile Keyword Part-1.vtt 27.1 MB
17. Importance of Volatile Keyword/1. Importance of Volatile Keyword Part-1.mp4 27.1 MB
75. USART driver development/2. USART driver APIs prototypes.mp4 26.8 MB
37. STM32 NSS pin settings and management/1. NSS settings in STM32 master and slave modes.mp4 26.5 MB
25/4. Defining base addresses of AHB1 Peripherals.mp4 26.4 MB
70. Exercise/3. Exercise Testing.mp4 26.3 MB
24. GPIO driver development overview and Project creation/1. GPIO driver development overview.mp4 26.2 MB
11. MCU Bus Interfaces/2. MCU Bus Interfaces Explanation Part 2 AHBAPB1APB2.mp4 25.5 MB
20. GPIO Registers SPEED, PULL UPDOWN, IDR and ODR/4. GPIO output data register and summary of various modes discussed.mp4 25.5 MB
19. GPIO Programming structure and Registers/8. Alternate functionality Configuration of a GPIO pin.mp4 25.4 MB
30. GPIO driver API Implementation GPIO init and de-init/3. Implementation of GPIO init API contd..mp4 25.3 MB
70. Exercise/1. Exercise I2C slave programming.mp4 25.0 MB
66. I2C interrupt based APIs/2. Implementation of I2C interrupt based APIs.mp4 25.0 MB
68. Exercise/2. Exercise Testing I2C interrupt APIs part 2.mp4 24.5 MB
8. LEDButton Exercises with OpenSTM32 SystemWorkbench/3. Downloading and testing LED Toggling Application ( For Nucleo).mp4 24.5 MB
40. SPI Driver API requirements and configuration structure/2. updating MCU specific header file with SPI related details.mp4 24.4 MB
9. Embedded Code Debugging Tools n Tips/4. Embedded Code Debugging Part-4 DisableKill all Bkpts..mp4 24.1 MB
66. I2C interrupt based APIs/1. Assignment I2C interrupt APIs implementation.mp4 23.7 MB
7. LEDButton Exercises using BSPs/4. Exercise Adding button support using board BSP APIs(Nucleo).mp4 23.6 MB
31. GPIO driver API Implementation GPIO data read and write/2. Implementation of GPIO output port write and output pin write APIs.mp4 23.4 MB
46. SPI Driver API Receive data/2. Implementation of SPI data receive API Part 2.mp4 22.5 MB
6. About the board/1. Understaning The Discovery Board.mp4 22.3 MB
78. USART interrupts/1. USART interrupt discussion.mp4 22.1 MB
17. Importance of Volatile Keyword/2. Importance of Volatile Keyword-Part 2.mp4 21.9 MB
75. USART driver development/4. USART Driver API USART Init.mp4 21.9 MB
29. GPIO driver API Implementation Clock control/1. Implementation of GPIO peripheral clock control API.mp4 21.6 MB
4. OpenSTM32 System Workbench installation/3. Installing OpenSTM32 System-Workbench.mp4 21.6 MB
63. I2C Driver API I2C Master receive data/2. Assignment I2C master receive data API implementation.mp4 21.2 MB
25/2. Writing base address C macros for MCU's embedded memories Part 2.mp4 21.1 MB
19. GPIO Programming structure and Registers/5. Output Configuration of a GPIO Pin in Push pull mode.mp4 20.9 MB
25/5. Defining base addresses of APB1 and APB2 Peripherals.mp4 20.3 MB
44. Exercise SPI Send Data/1. Exercise to test SPI Send Data API.mp4 19.6 MB
26. Structuring peripheral registers/1. Address of peripheral registers.mp4 19.1 MB
15/3. Understanding MCU interrupt Design , NVIC, Interrupt handling Part 3.mp4 18.3 MB
46. SPI Driver API Receive data/1. Implementation of SPI data receive API Part 1.mp4 18.2 MB
49. SPI interrupt mode APIs/3. SPI receive data with interrupt implementation.mp4 18.2 MB
28. GPIO driver API requirements and handle structure/1. Creating GPIO driver header and source file.mp4 18.0 MB
35. SPI introduction and bus details/3. Importance of SPI slave select pin.mp4 17.4 MB
7. LEDButton Exercises using BSPs/3. Exercise LED Toggling App using Board BSP APIs-Nucleo.mp4 17.4 MB
75. USART driver development/5. USART Driver API Tx and Rx assignment.mp4 17.0 MB
13. Understanding MCU Peripheral Clock Control/1. Understanding MCU Peripheral Clock control.mp4 16.7 MB
9. Embedded Code Debugging Tools n Tips/1. Embedded Code Debugging Part-1.mp4 15.5 MB
11. MCU Bus Interfaces/4. Understanding MCU Bus Matrix.mp4 15.2 MB
15/4. Understanding MCU interrupt Design , NVIC, Interrupt handling Part 4.mp4 15.0 MB
9. Embedded Code Debugging Tools n Tips/3. Embedded Code Debugging Part-3 Step InStep OverStep Out.mp4 14.2 MB
22. GPIO peripheral clock control/1. Enabling and disabling GPIO peripheral clock.mp4 13.3 MB
10. Understanding MCU Memory Map/1. Understanding Memory Map of the MCU Part 1.mp4 12.6 MB
33. GPIO pin Interrupt configuration/3. GPIO pin Interrupt configuration coding Part 3.mp4 12.4 MB
31. GPIO driver API Implementation GPIO data read and write/3. Implementation of GPIO pin toggle API.mp4 12.4 MB
43. SPI Driver API Implementation Send Data/4. Implementation of SPI send data API Part 4.mp4 12.3 MB
18. GPIO Must know concepts/5. GPIO output mode with open drain state.mp4 11.4 MB
51. Common problems in SPI/1. Common problems in SPI and Debugging Tips.mp4 11.2 MB
39. SPI serial clock discussion/1. SPI peripherals of your Microcontroller.mp4 11.2 MB
5. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/3. KEIL-MDK-5 Installation Contd..mp4 10.6 MB
32. Exercise/6. Exercise Button interrupt introduction.mp4 10.6 MB
74. UART Communication/2. Uart Receiver.mp4 10.1 MB
20. GPIO Registers SPEED, PULL UPDOWN, IDR and ODR/3. GPIO input data register.mp4 9.9 MB
19. GPIO Programming structure and Registers/9. GPIO out put type register explanation.mp4 9.7 MB
20. GPIO Registers SPEED, PULL UPDOWN, IDR and ODR/2. GPIO Pull up and Pull down register.mp4 9.6 MB
58. I2C serial clock discussion(SCLK)/2. Clock Stretching.mp4 8.7 MB
5. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/5. Locating Pack Installation files.mp4 8.6 MB
19. GPIO Programming structure and Registers/1. GPIO programming structure.mp4 8.2 MB
73. UART functional block and Peripheral Clock/1. Exploring UART functional block.mp4 8.1 MB
72. UART Essentials/6. UART Parity.mp4 7.8 MB
12. Understanding MCU Clocks and Details/4.2 HCLK_Measurement-Keil.zip.zip 7.4 MB
73. UART functional block and Peripheral Clock/2. UART peripheral clock.mp4 7.2 MB
74. UART Communication/1. UART Transmitter.mp4 7.2 MB
15/4.2 Button_interrupt-Keil.zip.zip 7.1 MB
72. UART Essentials/1. Intro UART vs USART.mp4 7.0 MB
71. Common problems in I2C/1. Common Problems in I2C and Debugging Tips.mp4 7.0 MB
18. GPIO Must know concepts/7. Optimizing IO power consumption.mp4 6.9 MB
18. GPIO Must know concepts/2. GPIO behind the scene.mp4 5.9 MB
18. GPIO Must know concepts/6. GPIO output mode with push pull state.mp4 5.7 MB
72. UART Essentials/2. Understanding UART pins.mp4 5.7 MB
9. Embedded Code Debugging Tools n Tips/2. Embedded Code Debugging Part-2 Break points.mp4 5.4 MB
18. GPIO Must know concepts/1. GPIO pin and GPIO port.mp4 5.4 MB
72. UART Essentials/4. Baud Rate.mp4 5.1 MB
19. GPIO Programming structure and Registers/7. Input stage of a GPIO pin during output configuration.mp4 4.8 MB
72. UART Essentials/3. UART frame formats.mp4 4.3 MB
57. I2C driver API requirements and config structures/2. I2C handle and configuration structure.mp4 4.2 MB
72. UART Essentials/5. Synchronization bits.mp4 4.1 MB
18. GPIO Must know concepts/3. GPIO input mode with high impedance state.mp4 2.9 MB
18. GPIO Must know concepts/4. GPIO input mode with pull-updown state.mp4 2.8 MB
19. GPIO Programming structure and Registers/2. Exploring GPIO PORT and pins of STM32F4xx Discovery board.mp4 2.5 MB
7. LEDButton Exercises using BSPs/3.1 STM32 Nucleo (64 pins) schematics.pdf.pdf 1.7 MB
11. MCU Bus Interfaces/4.1 Using the STM32F2 and STM32F4 DMA controller.pdf.pdf 1.4 MB
7. LEDButton Exercises using BSPs/2.1 User_manual_STM32f407_Disc_kit.pdf.pdf 1.2 MB
13. Understanding MCU Peripheral Clock Control/2.2 Peripheral_Clock-Keil.zip.zip 733.5 KB
13. Understanding MCU Peripheral Clock Control/4.1 clock_switching-Keil.zip.zip 729.5 KB
13. Understanding MCU Peripheral Clock Control/4.2 clock_switching-eclipse.zip.zip 722.8 KB
13. Understanding MCU Peripheral Clock Control/2.1 Peripheral_Clock-Eclipse.zip.zip 715.8 KB
15/4.1 Button_interrupt-Eclipse.zip.zip 580.7 KB
12. Understanding MCU Clocks and Details/4.1 HCLK_Measurement-Eclipse.zip.zip 577.9 KB
14. Understanding MCU Vector table/1.1 data_copy-Keil.zip.zip 352.5 KB
11. MCU Bus Interfaces/1.2 data_copy-Keil.zip.zip 352.3 KB
17. Importance of Volatile Keyword/2.2 volatile_experiment-Keil.zip.zip 347.7 KB
34. Exercise GPIO interrupts/1. Exercise External button interrupt implementation.vtt 23.0 KB
42. SPI Driver API Implementation SPI init/1. SPI user configuration options writing and register bit definition macros.vtt 21.3 KB
61. I2C pull up resistance , rise time and bus capacitance/1. I2C pull up resistance , rise time and bus capacitance discussion.vtt 20.8 KB
7. LEDButton Exercises using BSPs/2. Exercise LED Toggling App using Board BSP APIs.vtt 19.5 KB
68. Exercise/1. Exercise Testing I2C interrupt APIs part 1.vtt 19.1 KB
44. Exercise SPI Send Data/6. Exercise Testing.vtt 18.8 KB
9. Embedded Code Debugging Tools n Tips/7. Embedded Code Debugging Part-7 Memory Windows.vtt 18.4 KB
77. Exercise/1. Exercise USART send data to arduino.vtt 17.5 KB
16. Understanding MCU Specific Header file/1. Understanding MCU Specific header file Part 1.vtt 17.1 KB
14. Understanding MCU Vector table/1. Understanding MCU Vector Table Part-1.vtt 16.4 KB
15/2. Understanding MCU interrupt Design , NVIC, Interrupt handling Part 2.vtt 15.4 KB
26. Structuring peripheral registers/2. Structuring peripheral registers.vtt 15.2 KB
13. Understanding MCU Peripheral Clock Control/2. Exercise EnablingDisabling Peripheral Clock.vtt 15.1 KB
12. Understanding MCU Clocks and Details/3. Exercise-Using HSI Clock and Clock MeasurementPart 1.vtt 15.0 KB
70. Exercise/2. Exercise Coding Part 1.vtt 14.8 KB
19. GPIO Programming structure and Registers/4. Input configuration of a Microcontroller's GPIO Pin.vtt 14.2 KB
33. GPIO pin Interrupt configuration/4. GPIO pin Interrupt configuration coding Part 4.vtt 14.1 KB
64. Exercise/3. Exercise Coding Part 2.vtt 14.1 KB
63. I2C Driver API I2C Master receive data/1. I2C transfer sequence diagram for master receiving data.vtt 13.9 KB
16. Understanding MCU Specific Header file/2. Understanding MCU Specific header file Part 2.vtt 13.7 KB
5. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/4. KEIL-MDK-5 Pack Installation.vtt 13.4 KB
47. Exercise SPI receive data/4. Exercise Coding Part 3.vtt 13.3 KB
59. I2C Driver API I2C Init/1. Implementation of I2C init API Part 1.vtt 12.9 KB
5. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/6. Creating a KEIL Project.vtt 12.6 KB
8. LEDButton Exercises with OpenSTM32 SystemWorkbench/1. Creating First project using OpenSTM32 System workbench LED Toggling App.vtt 12.6 KB
17. Importance of Volatile Keyword/2.1 volatile_experiment-Eclipse.zip.zip 12.3 KB
12. Understanding MCU Clocks and Details/2. Understanding MCU Clocking System Part2.vtt 12.3 KB
60. I2C Driver API I2C Master send data/1. I2C transfer sequence diagram for master sending data.vtt 12.2 KB
14. Understanding MCU Vector table/1.2 data_copy-Eclipse.zip.zip 12.1 KB
9. Embedded Code Debugging Tools n Tips/8. Exercise-Copying data from Flash to RAM.vtt 12.1 KB
52. I2C introduction and I2C signals/1. I2C introduction and differences with SPI.vtt 12.1 KB
11. MCU Bus Interfaces/1.1 data_copy-Eclipse.zip.zip 12.1 KB
33. GPIO pin Interrupt configuration/7. GPIO pin Interrupt configuration coding Part 7.vtt 12.0 KB
38. SPI CPOL and CPHA discussion/1. SPI CPOL and CPHA discussion.vtt 12.0 KB
32. Exercise/1. Exercise LED toggling with PUSH PULL configuration.vtt 11.8 KB
11. MCU Bus Interfaces/3. MCU Bus Interfaces Explanation Part 3 QA session.vtt 11.7 KB
3. HardwareSoftware Requirements/1.1 Hardware-software used in MCU1.xlsx.xlsx 11.7 KB
62. Exercise/2. Exercise Coding Part 1.vtt 11.4 KB
32. Exercise/3. Exercise Handling on board LED and Button.vtt 11.2 KB
67. I2C IRQ handler implementation/6. I2C IRQ handler implementation Part 6.vtt 11.0 KB
75. USART driver development/3. Configuration options and USART registers.vtt 10.7 KB
11. MCU Bus Interfaces/1. MCU Bus Interfaces Explanation Part 1 I-CodeD-CodeS-Bus.vtt 10.7 KB
32. Exercise/4. Exercise Connecting external button and circuit explanation.vtt 10.6 KB
58. I2C serial clock discussion(SCLK)/1. I2C serial clock settings with explanation.vtt 10.5 KB
47. Exercise SPI receive data/2. Exercise Coding Part 1.vtt 10.5 KB
47. Exercise SPI receive data/3. Exercise Coding Part 2.vtt 10.5 KB
45. Exercise STM32 master and Arduino Slave communication/5. Exercise Testing.vtt 10.4 KB
28. GPIO driver API requirements and handle structure/4. Driver API input parameters and return types.vtt 10.1 KB
33. GPIO pin Interrupt configuration/6. GPIO pin Interrupt configuration coding Part 6.vtt 10.1 KB
50. SPI Driver API IRQ handling/4. SPI IRQ handler implementation Part 3.vtt 10.1 KB
54. Understanding I2C Protocol/2. I2C START and STOP conditions.vtt 9.9 KB
59. I2C Driver API I2C Init/3. Implementation of I2C init API Part 3.vtt 9.8 KB
15/1. Understanding MCU interrupt Design , NVIC, Interrupt handling Part 1.vtt 9.8 KB
9. Embedded Code Debugging Tools n Tips/5. Embedded Code Debugging Part-5 Call Stack Usage.vtt 9.7 KB
13. Understanding MCU Peripheral Clock Control/3. Exercise-Making HSE as System Clock.vtt 9.5 KB
34. Exercise GPIO interrupts/2. Exercise Debugging the application Part 1.vtt 9.5 KB
33. GPIO pin Interrupt configuration/5. GPIO pin Interrupt configuration coding Part 5.vtt 9.4 KB
43. SPI Driver API Implementation Send Data/1. Implementation of SPI send data API Part 1.vtt 9.3 KB
65. I2C Interrupts and IRQ numbers/2. I2C errors and importance of BUSY flag.vtt 9.3 KB
78. USART interrupts/3.1 USART_IRQHandling.c.c 9.1 KB
30. GPIO driver API Implementation GPIO init and de-init/4. Configuring Alternate function registers.vtt 9.1 KB
40. SPI Driver API requirements and configuration structure/1. SPI API requirements and configuration items.vtt 9.1 KB
50. SPI Driver API IRQ handling/3. SPI IRQ handler implementation Part 2.vtt 9.0 KB
44. Exercise SPI Send Data/4. Exercise Code implementation Part 2.vtt 9.0 KB
8. LEDButton Exercises with OpenSTM32 SystemWorkbench/5. Adding button support.vtt 8.9 KB
17. Importance of Volatile Keyword/2. Importance of Volatile Keyword-Part 2.vtt 8.8 KB
63. I2C Driver API I2C Master receive data/3. Implementation of I2C master receive data API Part 1.vtt 8.8 KB
27. Writing Clock enable and disable macros/1. Writing peripheral clock enable and disable C Macros.vtt 8.7 KB
2. Development board used in our courses/2. STM32F4 Discovery and Nucleo Board Details.vtt 8.7 KB
15/4. Understanding MCU interrupt Design , NVIC, Interrupt handling Part 4.vtt 8.6 KB
47. Exercise SPI receive data/1. Exercise SPI command and response based communication.vtt 8.5 KB
36. SPI bus configuration and functional block diagram/2. SPI functional block diagram explanation.vtt 8.4 KB
76. USART oversampling and baudrate/2. USART Baud rate calculation Part-2.vtt 8.4 KB
30. GPIO driver API Implementation GPIO init and de-init/1. Writing user configurable macros.vtt 8.3 KB
37. STM32 NSS pin settings and management/2. STM32 SPI hardware and software slave managements.vtt 8.2 KB
11. MCU Bus Interfaces/2. MCU Bus Interfaces Explanation Part 2 AHBAPB1APB2.vtt 8.2 KB
10. Understanding MCU Memory Map/3. Understanding Memory Map of the MCU Part 3.vtt 8.1 KB
67. I2C IRQ handler implementation/1. I2C IRQ handler implementation Part 1.vtt 8.0 KB
67. I2C IRQ handler implementation/3. I2C IRQ handler implementation Part 3.vtt 7.9 KB
60. I2C Driver API I2C Master send data/2. Implementation of I2C master sending data API Part 1.vtt 7.8 KB
50. SPI Driver API IRQ handling/2. SPI IRQ handler implementation Part 1.vtt 7.8 KB
38. SPI CPOL and CPHA discussion/2. SPI CPOL and CPHA waveform example.vtt 7.7 KB
64. Exercise/5. Exercise Testing repeated start.vtt 7.7 KB
69. I2C slave programming/2. I2C transfer sequence diagram for slave transmitter.vtt 7.7 KB
30. GPIO driver API Implementation GPIO init and de-init/2. Implementation of GPIO init API.vtt 7.3 KB
76. USART oversampling and baudrate/1. USART oversampling.vtt 7.2 KB
48. SPI interrupts/1. SPI peripheral interrupting the processor.vtt 7.1 KB
43. SPI Driver API Implementation Send Data/3. Implementation of SPI send data API Part 3.vtt 7.0 KB
7. LEDButton Exercises using BSPs/4. Exercise Adding button support using board BSP APIs(Nucleo).vtt 7.0 KB
45. Exercise STM32 master and Arduino Slave communication/2. Exercise Coding Part 1.vtt 7.0 KB
5. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/2. KEIL-MDK-5 Installation.vtt 6.9 KB
36. SPI bus configuration and functional block diagram/1. SPI bus configuration discussion full duplex, half duplex and simplex.vtt 6.8 KB
28. GPIO driver API requirements and handle structure/3. Driver API requirements and adding API prototypes.vtt 6.8 KB
64. Exercise/1. Exercise Reading data from the I2C slave.vtt 6.7 KB
40. SPI Driver API requirements and configuration structure/3. SPI adding API prototypes to driver header file.vtt 6.6 KB
25/3. Defining base addresses of different bus domains.vtt 6.6 KB
57. I2C driver API requirements and config structures/1. I2C driver API requirements.vtt 6.5 KB
21/2. Alternate functionality settings of a GPIO pin with example Part 1.vtt 6.5 KB
33. GPIO pin Interrupt configuration/1. GPIO pin Interrupt configuration coding Part 1.vtt 6.4 KB
11. MCU Bus Interfaces/4. Understanding MCU Bus Matrix.vtt 6.4 KB
6. About the board/2. About USB logic analyzer.vtt 6.3 KB
62. Exercise/4. Exercise Testing.vtt 6.3 KB
28. GPIO driver API requirements and handle structure/2. Defining GPIO handle and configuration structure.vtt 6.3 KB
19. GPIO Programming structure and Registers/3. GPIO Mode register(used to set mode for a pin).vtt 6.3 KB
8. LEDButton Exercises with OpenSTM32 SystemWorkbench/4. Writing LED Toggling Application ( For Discovery).vtt 6.2 KB
44. Exercise SPI Send Data/5. Exercise Code implementation Part 3.vtt 6.2 KB
57. I2C driver API requirements and config structures/3. I2C user configurable macros.vtt 6.2 KB
76. USART oversampling and baudrate/4. USART baudrate coding.vtt 6.1 KB
69. I2C slave programming/1. I2C slave programming discussion.vtt 6.1 KB
20. GPIO Registers SPEED, PULL UPDOWN, IDR and ODR/1. GPIO output speed register and its applicability.vtt 6.1 KB
32. Exercise/2. Exercise LED toggling with OPEN DRAIN configuration.vtt 6.1 KB
51. Common problems in SPI/1. Common problems in SPI and Debugging Tips.vtt 6.0 KB
7. LEDButton Exercises using BSPs/3. Exercise LED Toggling App using Board BSP APIs-Nucleo.vtt 6.0 KB
45. Exercise STM32 master and Arduino Slave communication/1. Exercise Communicating with Arduino slave.vtt 6.0 KB
12. Understanding MCU Clocks and Details/1. Understanding MCU Clocking SystemPart1.vtt 6.0 KB
19. GPIO Programming structure and Registers/6. Output Configuration of a GPIO Pin in open drain mode.vtt 5.9 KB
9. Embedded Code Debugging Tools n Tips/3. Embedded Code Debugging Part-3 Step InStep OverStep Out.vtt 5.8 KB
2. Development board used in our courses/1. About MCU Development board.vtt 5.8 KB
60. I2C Driver API I2C Master send data/4. Implementation of I2C master sending data API Part 3.vtt 5.8 KB
33. GPIO pin Interrupt configuration/2. GPIO pin Interrupt configuration coding Part 2.vtt 5.8 KB
59. I2C Driver API I2C Init/2. Implementation of I2C init API Part 2.vtt 5.8 KB
8. LEDButton Exercises with OpenSTM32 SystemWorkbench/2. Writing LED Toggling Application ( For Nucleo).vtt 5.7 KB
41. SPI Driver API Implementation Clock control/1. Implementation of SPI peripheral clock control API.vtt 5.7 KB
25/6. Defining base addresses conclusion.vtt 5.6 KB
65. I2C Interrupts and IRQ numbers/1. I2C IRQ and interrupt discussion.vtt 5.6 KB
18. GPIO Must know concepts/5. GPIO output mode with open drain state.vtt 5.6 KB
64. Exercise/2. Exercise Coding Part 1.vtt 5.6 KB
4. OpenSTM32 System Workbench installation/2. Downloading and Installing OpenSTM32 System-Workbench.vtt 5.5 KB
44. Exercise SPI Send Data/3. Exercise Code implementation Part 1.vtt 5.5 KB
75. USART driver development/6. USART Driver API Send data.vtt 5.5 KB
39. SPI serial clock discussion/2. SPI Serial clock frequency.vtt 5.4 KB
15/3. Understanding MCU interrupt Design , NVIC, Interrupt handling Part 3.vtt 5.4 KB
55. I2C master and slave communication/2. Understanding repeated START condition.vtt 5.4 KB
43. SPI Driver API Implementation Send Data/2. Implementation of SPI send data API Part 2.vtt 5.4 KB
13. Understanding MCU Peripheral Clock Control/4. Exercise-Making HSE as System Clock Contd..vtt 5.3 KB
54. Understanding I2C Protocol/1. I2C Protocol explanation.vtt 5.3 KB
49. SPI interrupt mode APIs/1. SPI interrupt mode API implementation and changes to handle structure.vtt 5.3 KB
35. SPI introduction and bus details/5. SPI behind the scene data communication principle.vtt 5.3 KB
14. Understanding MCU Vector table/2. Understanding MCU Vector Table Part-2.vtt 5.2 KB
42. SPI Driver API Implementation SPI init/3. Implementation of SPI init API Part 2.vtt 5.2 KB
75. USART driver development/1. USART driver development confiugrable items.vtt 5.2 KB
21/1. Alternate functionality settings of a GPIO pin with example Part 1.vtt 5.1 KB
57. I2C driver API requirements and config structures/5. Steps for I2C init implementation.vtt 5.1 KB
30. GPIO driver API Implementation GPIO init and de-init/5. GPIO de-init API implementation.vtt 5.1 KB
12. Understanding MCU Clocks and Details/4. Exercise-Using HSI Clock and Clock Measurement Part 2.vtt 5.1 KB
75. USART driver development/5.1 USART_DataTxRxAPIs.c.c 5.1 KB
8. LEDButton Exercises with OpenSTM32 SystemWorkbench/6. OpenSTM32 System Workbench Debugging.vtt 4.9 KB
69. I2C slave programming/3. I2C slave support in driver.vtt 4.9 KB
13. Understanding MCU Peripheral Clock Control/1. Understanding MCU Peripheral Clock control.vtt 4.8 KB
76. USART oversampling and baudrate/3. USART Baud rate calculation Part-2.vtt 4.7 KB
10. Understanding MCU Memory Map/1. Understanding Memory Map of the MCU Part 1.vtt 4.7 KB
61. I2C pull up resistance , rise time and bus capacitance/2. I2C rise time calculation.vtt 4.6 KB
35. SPI introduction and bus details/2. SPI comparison with other protocols.vtt 4.6 KB
26. Structuring peripheral registers/3. Peripheral definition macros.vtt 4.6 KB
9. Embedded Code Debugging Tools n Tips/1. Embedded Code Debugging Part-1.vtt 4.5 KB
50. SPI Driver API IRQ handling/1. SPI Handling of interrupts.vtt 4.5 KB
24. GPIO driver development overview and Project creation/1. GPIO driver development overview.vtt 4.5 KB
49. SPI interrupt mode APIs/2. SPI send data with interrupt API implementation.vtt 4.5 KB
44. Exercise SPI Send Data/2. Finding out microcontroller pins to communicate over SPI2.vtt 4.5 KB
2. Development board used in our courses/4. ST Link Firmware Upgrade.vtt 4.4 KB
67. I2C IRQ handler implementation/8. I2C IRQ handler implementation Part 8.vtt 4.4 KB
53. I2C modes/1. I2C standard and fast mode.vtt 4.3 KB
4. OpenSTM32 System Workbench installation/5. STM32CubeMX Installation.vtt 4.3 KB
56. STM32 I2C functional block diagram/1. I2C functional block diagram.vtt 4.3 KB
62. Exercise/1. Exercise Introduction.vtt 4.3 KB
67. I2C IRQ handler implementation/2. I2C IRQ handler implementation Part 2.vtt 4.2 KB
24. GPIO driver development overview and Project creation/3. New project creation and creating MCU specific headerfile.vtt 4.1 KB
31. GPIO driver API Implementation GPIO data read and write/1. Implementation of GPIO input port read and input pin read APIs.vtt 4.1 KB
62. Exercise/3. Exercise Coding Part 2.vtt 4.1 KB
45. Exercise STM32 master and Arduino Slave communication/4. Exercise Coding Part 3.vtt 4.0 KB
60. I2C Driver API I2C Master send data/5. Implementation of I2C master sending data API Part 4.vtt 4.0 KB
54. Understanding I2C Protocol/4. I2C Data validity.vtt 4.0 KB
34. Exercise GPIO interrupts/3. Exercise Debugging the application Part 2.vtt 3.9 KB
42. SPI Driver API Implementation SPI init/2. Implementation of SPI init API Part 1.vtt 3.9 KB
25/1. Writing base address C macros for MCU's embedded memories Part 1.vtt 3.9 KB
64. Exercise/4. Exercise Coding Part 3.vtt 3.9 KB
55. I2C master and slave communication/1. Example of master writing to slave.vtt 3.9 KB
70. Exercise/4. Exercise Modifying I2C transactions.vtt 3.8 KB
78. USART interrupts/2. Exercise.vtt 3.8 KB
9. Embedded Code Debugging Tools n Tips/6. Embedded Code Debugging Part-6 Watch Windows.vtt 3.8 KB
74. UART Communication/2. Uart Receiver.vtt 3.8 KB
57. I2C driver API requirements and config structures/4. I2C API prototypes.vtt 3.8 KB
77. Exercise/2. communicating with PC over UART.vtt 3.7 KB
71. Common problems in I2C/1. Common Problems in I2C and Debugging Tips.vtt 3.6 KB
67. I2C IRQ handler implementation/5. I2C IRQ handler implementation Part 5.vtt 3.6 KB
65. I2C Interrupts and IRQ numbers/4. I2C adding interrupt related macros and interrupt APIs.vtt 3.6 KB
19. GPIO Programming structure and Registers/5. Output Configuration of a GPIO Pin in Push pull mode.vtt 3.6 KB
27. Writing Clock enable and disable macros/2. Project include settings and build.vtt 3.5 KB
52. I2C introduction and I2C signals/2. I2C SDA and SCL signals.vtt 3.5 KB
25/4. Defining base addresses of AHB1 Peripherals.vtt 3.4 KB
37. STM32 NSS pin settings and management/1. NSS settings in STM32 master and slave modes.vtt 3.4 KB
63. I2C Driver API I2C Master receive data/4. Implementation of I2C master receive data API Part 2.vtt 3.4 KB
28. GPIO driver API requirements and handle structure/5. Driver empty API implementation and documentation.vtt 3.4 KB
4. OpenSTM32 System Workbench installation/3. Installing OpenSTM32 System-Workbench.vtt 3.4 KB
67. I2C IRQ handler implementation/7. I2C IRQ handler implementation Part 7.vtt 3.4 KB
45. Exercise STM32 master and Arduino Slave communication/3. Exercise Coding Part 2.vtt 3.3 KB
75. USART driver development/2.1 USART_API_prototype.h.h 3.3 KB
79. BONUS LECTURE/1. BONUS LECTURE.html 3.3 KB
72. UART Essentials/6. UART Parity.vtt 3.3 KB
75. USART driver development/4.1 USART_Init.c.c 3.3 KB
78. USART interrupts/1. USART interrupt discussion.vtt 3.3 KB
10. Understanding MCU Memory Map/2. Understanding Memory Map of the MCU Part 2.vtt 3.2 KB
5. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/5. Locating Pack Installation files.vtt 3.2 KB
67. I2C IRQ handler implementation/9. I2C error IRQ handler implementation.vtt 3.2 KB
19. GPIO Programming structure and Registers/8. Alternate functionality Configuration of a GPIO pin.vtt 3.2 KB
2. Development board used in our courses/3. ST-Link Driver Installation.vtt 3.2 KB
32. Exercise/5. Exercise Testing button interface.vtt 3.1 KB
58. I2C serial clock discussion(SCLK)/2. Clock Stretching.vtt 3.1 KB
67. I2C IRQ handler implementation/4. I2C IRQ handler implementation Part 4.vtt 3.0 KB
18. GPIO Must know concepts/7. Optimizing IO power consumption.vtt 3.0 KB
35. SPI introduction and bus details/3. Importance of SPI slave select pin.vtt 3.0 KB
70. Exercise/1. Exercise I2C slave programming.vtt 3.0 KB
35. SPI introduction and bus details/4. SPI Minimum bus configuration.vtt 3.0 KB
54. Understanding I2C Protocol/3. I2C ACK and NACK.vtt 2.9 KB
24. GPIO driver development overview and Project creation/2. MCU Specific header file and its contents.vtt 2.9 KB
30. GPIO driver API Implementation GPIO init and de-init/3. Implementation of GPIO init API contd..vtt 2.9 KB
60. I2C Driver API I2C Master send data/3. Implementation of I2C master sending data API Part 2.vtt 2.8 KB
29. GPIO driver API Implementation Clock control/1. Implementation of GPIO peripheral clock control API.vtt 2.8 KB
20. GPIO Registers SPEED, PULL UPDOWN, IDR and ODR/4. GPIO output data register and summary of various modes discussed.vtt 2.8 KB
18. GPIO Must know concepts/2. GPIO behind the scene.vtt 2.7 KB
18. GPIO Must know concepts/6. GPIO output mode with push pull state.vtt 2.7 KB
9. Embedded Code Debugging Tools n Tips/4. Embedded Code Debugging Part-4 DisableKill all Bkpts..vtt 2.7 KB
44. Exercise SPI Send Data/1. Exercise to test SPI Send Data API.vtt 2.7 KB
70. Exercise/3. Exercise Testing.vtt 2.7 KB
74. UART Communication/1. UART Transmitter.vtt 2.6 KB
8. LEDButton Exercises with OpenSTM32 SystemWorkbench/3. Downloading and testing LED Toggling Application ( For Nucleo).vtt 2.6 KB
72. UART Essentials/1. Intro UART vs USART.vtt 2.6 KB
31. GPIO driver API Implementation GPIO data read and write/2. Implementation of GPIO output port write and output pin write APIs.vtt 2.6 KB
65. I2C Interrupts and IRQ numbers/3. I2C handle structure modification.vtt 2.6 KB
66. I2C interrupt based APIs/1. Assignment I2C interrupt APIs implementation.vtt 2.6 KB
67. I2C IRQ handler implementation/9.1 I2C_ER_IRQHandling.c.c 2.5 KB
25/2. Writing base address C macros for MCU's embedded memories Part 2.vtt 2.5 KB
66. I2C interrupt based APIs/2. Implementation of I2C interrupt based APIs.vtt 2.5 KB
68. Exercise/2. Exercise Testing I2C interrupt APIs part 2.vtt 2.5 KB
60. I2C Driver API I2C Master send data/6. Implementation of I2C master sending data API Part 5.vtt 2.5 KB
26. Structuring peripheral registers/1. Address of peripheral registers.vtt 2.5 KB
5. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/3. KEIL-MDK-5 Installation Contd..vtt 2.3 KB
40. SPI Driver API requirements and configuration structure/2. updating MCU specific header file with SPI related details.vtt 2.3 KB
9. Embedded Code Debugging Tools n Tips/2. Embedded Code Debugging Part-2 Break points.vtt 2.3 KB
46. SPI Driver API Receive data/1. Implementation of SPI data receive API Part 1.vtt 2.3 KB
73. UART functional block and Peripheral Clock/1. Exploring UART functional block.vtt 2.3 KB
19. GPIO Programming structure and Registers/1. GPIO programming structure.vtt 2.2 KB
75. USART driver development/4. USART Driver API USART Init.vtt 2.2 KB
75. USART driver development/2. USART driver APIs prototypes.vtt 2.1 KB
46. SPI Driver API Receive data/2. Implementation of SPI data receive API Part 2.vtt 2.1 KB
72. UART Essentials/4. Baud Rate.vtt 2.0 KB
63. I2C Driver API I2C Master receive data/2. Assignment I2C master receive data API implementation.vtt 1.9 KB
72. UART Essentials/2. Understanding UART pins.vtt 1.9 KB
25/5. Defining base addresses of APB1 and APB2 Peripherals.vtt 1.9 KB
28. GPIO driver API requirements and handle structure/1. Creating GPIO driver header and source file.vtt 1.8 KB
18. GPIO Must know concepts/1. GPIO pin and GPIO port.vtt 1.8 KB
49. SPI interrupt mode APIs/3. SPI receive data with interrupt implementation.vtt 1.8 KB
76. USART oversampling and baudrate/4.1 USART_BaudCalculation.c.c 1.7 KB
39. SPI serial clock discussion/1. SPI peripherals of your Microcontroller.vtt 1.6 KB
22. GPIO peripheral clock control/1. Enabling and disabling GPIO peripheral clock.vtt 1.6 KB
75. USART driver development/5. USART Driver API Tx and Rx assignment.vtt 1.6 KB
6. About the board/1. Understaning The Discovery Board.vtt 1.5 KB
73. UART functional block and Peripheral Clock/2. UART peripheral clock.vtt 1.5 KB
72. UART Essentials/3. UART frame formats.vtt 1.4 KB
31. GPIO driver API Implementation GPIO data read and write/3. Implementation of GPIO pin toggle API.vtt 1.3 KB
19. GPIO Programming structure and Registers/9. GPIO out put type register explanation.vtt 1.3 KB
20. GPIO Registers SPEED, PULL UPDOWN, IDR and ODR/3. GPIO input data register.vtt 1.2 KB
43. SPI Driver API Implementation Send Data/4. Implementation of SPI send data API Part 4.vtt 1.2 KB
18. GPIO Must know concepts/4. GPIO input mode with pull-updown state.vtt 1.2 KB
1. Notes and Information/1. Important Note.html 1.2 KB
32. Exercise/6. Exercise Button interrupt introduction.vtt 1.2 KB
18. GPIO Must know concepts/3. GPIO input mode with high impedance state.vtt 1.2 KB
72. UART Essentials/5. Synchronization bits.vtt 1.1 KB
33. GPIO pin Interrupt configuration/3. GPIO pin Interrupt configuration coding Part 3.vtt 1.1 KB
67. I2C IRQ handler implementation/1.1 I2C_EV_IRQHandling.c.c 1.1 KB
66. I2C interrupt based APIs/1.2 I2C_MasterReceiveDataIT.c.c 1.1 KB
20. GPIO Registers SPEED, PULL UPDOWN, IDR and ODR/2. GPIO Pull up and Pull down register.vtt 1.0 KB
66. I2C interrupt based APIs/1.1 I2C_MasterSendDataIT.c.c 1.0 KB
23. Course Part II Driver development/1. Important note on IDE usage.html 973 bytes
1. Notes and Information/3. Rating and Review.html 792 bytes
19. GPIO Programming structure and Registers/7. Input stage of a GPIO pin during output configuration.vtt 749 bytes
19. GPIO Programming structure and Registers/2. Exploring GPIO PORT and pins of STM32F4xx Discovery board.vtt 720 bytes
57. I2C driver API requirements and config structures/2. I2C handle and configuration structure.vtt 672 bytes
21/3. Request for Review.html 528 bytes
4. OpenSTM32 System Workbench installation/4. Note for the students.html 345 bytes
1. Notes and Information/2. Source Code.html 312 bytes
7. LEDButton Exercises using BSPs/1. Note for the students.html 306 bytes
5. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/1. Note for the students.html 274 bytes
6. About the board/1.1 User Manual.html 233 bytes
78. USART interrupts/3. USART IRQ handler implementation Assignment.html 202 bytes
4. OpenSTM32 System Workbench installation/1. Note for the students.html 197 bytes
3. HardwareSoftware Requirements/1. HardwareSoftware Requirements.html 185 bytes
10. Understanding MCU Memory Map/4. Test your understanding.html 171 bytes
11. MCU Bus Interfaces/5. Test your understanding.html 171 bytes
12. Understanding MCU Clocks and Details/5. Test your understanding.html 171 bytes
18. GPIO Must know concepts/8. Test your understanding.html 171 bytes
21/5. Test your understanding.html 171 bytes
21/6. Test your understanding.html 171 bytes
6. About the board/3. Test your understanding.html 171 bytes
21/4. Find Out IO Alt Functionality.html 170 bytes
54. Understanding I2C Protocol/5. Quiz SPI and I2C.html 170 bytes
74. UART Communication/3. UART Start bit Detection.html 170 bytes
35. SPI introduction and bus details/1. Introduction to SPI Bus.vtt 160 bytes
[Tutorialsplanet.NET].url 128 bytes
2. Development board used in our courses/1.1 Discovery kit with STM32F407VG MCU.html 120 bytes
2. Development board used in our courses/1.2 STM32 Nucleo-64 development board.html 117 bytes
2. Development board used in our courses/3.1 ST-LINK, ST-LINKV2, ST-LINKV2-1 USB driver signed for Windows7, Windows8, Windows10.html 117 bytes
2. Development board used in our courses/4.1 ST-LINK, ST-LINKV2, ST-LINKV2-1 firmware upgrade.html 117 bytes

[Tutorialsplanet.NET] Udemy - Mastering Microcontroller with Embedded Driver Development

File List

Download Torrent

Related Resources

Copyright Infringement